Форум администраторов игровых серверов - Не заходит у друзей на мой сервер

- Архив (https://forum.zone-game.info/forumdisplay.php?f=185)

- - Не заходит у друзей на мой сервер (https://forum.zone-game.info/showthread.php?t=8374)

Не заходит у друзей на мой сервер

Создал сервер настроил , вписал все IP , Подключаюсь к своему серверу , всё работает , кидаю папку систем друзьям , оня вводят логин проль , принять , и зависают на выборе сервера (

Re: Не заходит у друзей на мой сервер

конфиги выложи... и файл l2.ini

Re: Не заходит у друзей на мой сервер

KinlyDog, друзья из вне или внутри локалки?

Re: Не заходит у друзей на мой сервер

Цитата:

Сообщение от Дух системы (Сообщение 72001)

KinlyDog, друзья из вне или внутри локалки?

внутри локалки

Добавлено через 37 секунд

Цитата:

Сообщение от Дух системы (Сообщение 72001)

KinlyDog, друзья из вне или внутри локалки?

Цитата:

Сообщение от Credo (Сообщение 71973)

конфиги выложи... и файл l2.ini

выложу чють поже

Re: Не заходит у друзей на мой сервер

KinlyDog, проверяй не лочит ли брандмауэр используемые порты, а на всякий доабвь в исключения все которые используются , не ставь сервера слушать 127.0.0.1, лучше какой нибудь физический интерфейс.

по сути у тебя не пускает людей на гейм, тк он для них закрыт

сервера нормально друг друга находят?

Re: Не заходит у друзей на мой сервер

KinlyDog, Самое первое как все писали уже проверь свой л2 ини точнее ихний. И проверь настройки своего сервера. Еще лучше выложи пропертис геймсервера и логин сервера. Если лень выкладывать тогды проверь просо все ли правильно написал либо кинь сюда код файлов этих (gameserver/loginserver propertis)

Re: Не заходит у друзей на мой сервер

Цитата:

Сообщение от UFODriverr (Сообщение 72609)

Код HTML:

# ---------------------------------------------------------------------------

# Login Server Settings

# ---------------------------------------------------------------------------

# This is the server configuration file. Here you can set up the connection information for your server.

# This was written with the assumption that you are behind a router.

# Dumbed Down Definitions...

# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.

# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).

# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.

# ---------------------------------------------------------------------------

# Networking

# ---------------------------------------------------------------------------

# This is transmitted to the clients connecting from an external network, so it has to be a public IP or resolvable hostname

# Common settings...

# 127.0.0.1 - If you are playing alone on a test server

# 192.168.x.x - This is if you are on a 192.168.x.x type network (behind a standard consumer router) and want other computers from JUST the internal network to be able to connect

# x.x.x.x - WAN IP obtained from http://www.whatismyip.com/. This is if you want people outside your internal network to be able to connect to your server.

# ---------------------------------------------------------------------------

# Default: 127.0.0.1

ExternalHostname = 192.168.1.12





# ---------------------------------------------------------------------------

# This is transmitted to the client from the same network, so it has to be a local IP or resolvable hostname.

# This can be the internal IP such as 127.0.0.1 or the computer's IP such as 192.168.x.x.

# ---------------------------------------------------------------------------

# Default: 127.0.0.1

InternalHostname = 127.0.0.1



# ---------------------------------------------------------------------------

# If you are behind a router which using its own local IP for Port Forwarding then set this to the routers

# local IP if you want people outside your internal network to be able to connect to your server.

# ---------------------------------------------------------------------------

# RouterHostname = 



# Bind ip of the LoginServer, use * to bind on all available IPs

# Default: *

LoginserverHostname = *



# Default: 2106

LoginserverPort = 2106



# The address on which login will listen for GameServers, use * to bind on all available IPs

# Default: *

LoginHostname = *



# The port on which login will listen for GameServers

# Default: 9014

LoginPort = 9014



# The delay in minutes after which the login updates the gameservers IP's (usefull when their ip is dynamic)

# Default: 15

IpUpdateTime = 15





# ---------------------------------------------------------------------------

# Security

# ---------------------------------------------------------------------------

# Default: True

LogLoginController = True



# How many times you can provide an invalid account/pass before the IP gets banned.

# Default: 10

LoginTryBeforeBan = 10



# Time you won't be able to login back again after LoginTryBeforeBan tries to login.

# Default: 600 (10 minutes)

LoginBlockAfterBan = 600



# If set to True any GameServer can register on your login's free slots

# Default: False

AcceptNewGameServer = False



# Enforce GameGuard authorization from client?

# If True, login server will kick client if the client bypassed GameGuard authentication.

# Default: False

ForceGGAuth = False



# Flood Protection. All values are in MILISECONDS.

# Default: True

EnableFloodProtection = True



# Default: 15

FastConnectionLimit = 15



# Default: 700

NormalConnectionTime = 700



# Default: 350

FastConnectionTime = 350



# Default: 50

MaxConnectionPerIP = 50





# ---------------------------------------------------------------------------

# Database

# ---------------------------------------------------------------------------

# Specify the appropriate driver and url for the database you're using.

# Examples:

# Driver = com.mysql.jdbc.Driver (default)

# Driver = org.hsqldb.jdbcDriver

# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver

Driver = com.mysql.jdbc.Driver

# Database URL

# URL = jdbc:mysql://localhost/l2jdb (default)

# URL = jdbc:hsqldb:hsql://localhost/l2jdb

# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password = 

URL = jdbc:mysql://localhost/l2jdb

# Database user info (default is "root" but it's not recommended)

Login = root

# Database connection password

Password = 111



# Default: 10

MaximumDbConnections = 10



# Default: 0

MaximumDbIdleTime = 0





# ---------------------------------------------------------------------------

# Misc.

# ---------------------------------------------------------------------------

# If False, the license (after the login) will not be shown.

# Default: True

ShowLicence = True



# Default: True

AutoCreateAccounts = True





# ---------------------------------------------------------------------------

# Developer Settings

# ---------------------------------------------------------------------------

# Default: False

Debug = False



# Default: False

Assert = False



# Default: False

Developer = False

Код HTML:

# ---------------------------------------------------------------------------

# Game Server Settings

# ---------------------------------------------------------------------------

# This is the server configuration file. Here you can set up the connection information for your server.

# This was written with the assumption that you are behind a router.

# Dumbed Down Definitions...

# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.

# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).

# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.

# ---------------------------------------------------------------------------

# Networking

# ---------------------------------------------------------------------------

# This is transmitted to the clients connecting from an external network, so it has to be a public IP or resolvable hostname

# Common settings...

# 127.0.0.1 - If you are playing alone on a test server

# 192.168.x.x - This is if you are on a 192.168.x.x type network (behind a standard consumer router) and want other computers from JUST the internal network to be able to connect

# x.x.x.x - WAN IP obtained from http://www.whatismyip.com/. This is if you want people outside your internal network to be able to connect to your server.

# If this IP is resolvable by the Login Server, just leave *.

# ---------------------------------------------------------------------------

# Default: *

ExternalHostname = 192.168.1.12



# ---------------------------------------------------------------------------

# This is transmitted to the client from the same network, so it has to be a local IP or resolvable hostname.

# This can be the internal IP such as 127.0.0.1 or the computer's IP such as 192.168.x.x.

# If this IP is resolvable by the Login Server, just leave *.

# ---------------------------------------------------------------------------

# Default: *

InternalHostname = *



# Where's the Login server this gameserver should connect to

# Default: 127.0.0.1

LoginHost = 127.0.0.1



# TCP port the login server listen to for gameserver connection requests

# Default: 9014

LoginPort = 9014



# Default: *

GameserverHostname = *



# Default: 7777

GameserverPort = 7777





# ---------------------------------------------------------------------------

# Database

# ---------------------------------------------------------------------------

# Specify the appropriate driver and url for the database you're using.

# Examples:

# Driver = com.mysql.jdbc.Driver (default)

# Driver = org.hsqldb.jdbcDriver

# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver

Driver = com.mysql.jdbc.Driver

# Database URL

# URL = jdbc:mysql://localhost/l2jdb (default)

# URL = jdbc:hsqldb:hsql://localhost/l2jdb

# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password = 

URL = jdbc:mysql://localhost/l2jdb

# Database user info (default is "root" but it's not recommended)

Login = root

# Database connection password

Password = 111



# Default: 100

MaximumDbConnections = 100



# Default: 0

MaximumDbIdleTime = 0



# ---------------------------------------------------------------------------

# Misc Server Settings

# ---------------------------------------------------------------------------

# This is the server ID that the Game Server will request.

# Example: 1 = Bartz

# Default: 1

RequestServerID = 1



# True = The Login Server will give an other ID to the server if the requested ID is already reserved.

# Default: True

AcceptAlternateID = True



# Datapack root directory.

# Defaults to current directory from which the server is started unless the below line is uncommented.

#DatapackRoot = C:/Work/tmp/DataPack



# Define how many players are allowed to play simultaneously on your server.

# Default: 100

MaximumOnlineUsers = 100



# Minimum and maximum protocol revision that server allow to connect.

# Warning: You must make sure that the minimum revision is always less than or equal to the maximum revision.

# WARNING: <u><b><font color="red">Changing the protocol revision may result in incompatible communication and many errors in game!</font></b></u>

# Default: 146

MinProtocolRevision = 146



# Minimum and maximum protocol revision that server allow to connect.

# Warning: You must make sure that the minimum revision is always less than or equal to the maximum revision.

# WARNING: <u><b><font color="red">Changing the protocol revision may result in incompatible communication and many errors in game!</font></b></u>

# Default: 146

MaxProtocolRevision = 146





# ---------------------------------------------------------------------------

# Misc Player Settings

# ---------------------------------------------------------------------------



# Character name template.

# Examples:

# CnameTemplate = [A-Z][a-z]{3,3}[A-Za-z0-9]*

# The above setting will allow names with first capital letter, next three small letters,

# and any letter (case insensitive) or number, like OmfgWTF1

# CnameTemplate = [A-Z][a-z]*

# The above setting will allow names only of letters with first one capital, like Omfgwtf

# Default .* (allows any symbol)

CnameTemplate = .*



# This setting restricts names players can give to their pets.

# See CnameTemplate for details

PetNameTemplate = .*



# Maximum number of characters per account.

# Default: 7 (client limit)

CharMaxNumber = 7

а папку систем качал с этого сайта раскодировал л2 ини и поменял только ServerAddr=192.168.1.12 закодировал обратно и кинул в папку систем , потом кинул паппку систем друзьям...

Re: Не заходит у друзей на мой сервер

KinlyDog, Ты не туда списал свой ип. Ип локалки впиши в

Код:

InternalHostname = 127.0.0.1

а не в

Код:

ExternalHostname = 192.168.1.12

Должно быть так.

Код:

# ---------------------------------------------------------------------------

# Login Server Settings

# ---------------------------------------------------------------------------

# This is the server configuration file. Here you can set up the connection information for your server.

# This was written with the assumption that you are behind a router.

# Dumbed Down Definitions...

# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.

# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).

# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.

# ---------------------------------------------------------------------------

# Networking

# ---------------------------------------------------------------------------

# This is transmitted to the clients connecting from an external network, so it has to be a public IP or resolvable hostname

# Common settings...

# 127.0.0.1 - If you are playing alone on a test server

# 192.168.x.x - This is if you are on a 192.168.x.x type network (behind a standard consumer router) and want other computers from JUST the internal network to be able to connect

# x.x.x.x - WAN IP obtained from http://www.whatismyip.com/. This is if you want people outside your internal network to be able to connect to your server.

# ---------------------------------------------------------------------------

# Default: 127.0.0.1

ExternalHostname = 192.168.1.12





# ---------------------------------------------------------------------------

# This is transmitted to the client from the same network, so it has to be a local IP or resolvable hostname.

# This can be the internal IP such as 127.0.0.1 or the computer's IP such as 192.168.x.x.

# ---------------------------------------------------------------------------

# Default: 127.0.0.1

InternalHostname = 192.168.1.12



# ---------------------------------------------------------------------------

# If you are behind a router which using its own local IP for Port Forwarding then set this to the routers

# local IP if you want people outside your internal network to be able to connect to your server.

# ---------------------------------------------------------------------------

# RouterHostname = 



# Bind ip of the LoginServer, use * to bind on all available IPs

# Default: *

LoginserverHostname = *



# Default: 2106

LoginserverPort = 2106



# The address on which login will listen for GameServers, use * to bind on all available IPs

# Default: *

LoginHostname = *



# The port on which login will listen for GameServers

# Default: 9014

LoginPort = 9014



# The delay in minutes after which the login updates the gameservers IP's (usefull when their ip is dynamic)

# Default: 15

IpUpdateTime = 15





# ---------------------------------------------------------------------------

# Security

# ---------------------------------------------------------------------------

# Default: True

LogLoginController = True



# How many times you can provide an invalid account/pass before the IP gets banned.

# Default: 10

LoginTryBeforeBan = 10



# Time you won't be able to login back again after LoginTryBeforeBan tries to login.

# Default: 600 (10 minutes)

LoginBlockAfterBan = 600



# If set to True any GameServer can register on your login's free slots

# Default: False

AcceptNewGameServer = False



# Enforce GameGuard authorization from client?

# If True, login server will kick client if the client bypassed GameGuard authentication.

# Default: False

ForceGGAuth = False



# Flood Protection. All values are in MILISECONDS.

# Default: True

EnableFloodProtection = True



# Default: 15

FastConnectionLimit = 15



# Default: 700

NormalConnectionTime = 700



# Default: 350

FastConnectionTime = 350



# Default: 50

MaxConnectionPerIP = 50





# ---------------------------------------------------------------------------

# Database

# ---------------------------------------------------------------------------

# Specify the appropriate driver and url for the database you're using.

# Examples:

# Driver = com.mysql.jdbc.Driver (default)

# Driver = org.hsqldb.jdbcDriver

# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver

Driver = com.mysql.jdbc.Driver

# Database URL

# URL = jdbc:mysql://localhost/l2jdb (default)

# URL = jdbc:hsqldb:hsql://localhost/l2jdb

# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password = 

URL = jdbc:mysql://localhost/l2jdb

# Database user info (default is "root" but it's not recommended)

Login = root

# Database connection password

Password = 111



# Default: 10

MaximumDbConnections = 10



# Default: 0

MaximumDbIdleTime = 0





# ---------------------------------------------------------------------------

# Misc.

# ---------------------------------------------------------------------------

# If False, the license (after the login) will not be shown.

# Default: True

ShowLicence = True



# Default: True

AutoCreateAccounts = True





# ---------------------------------------------------------------------------

# Developer Settings

# ---------------------------------------------------------------------------

# Default: False

Debug = False



# Default: False

Assert = False



# Default: False

Developer = False

Код:

# ---------------------------------------------------------------------------

# Game Server Settings

# ---------------------------------------------------------------------------

# This is the server configuration file. Here you can set up the connection information for your server.

# This was written with the assumption that you are behind a router.

# Dumbed Down Definitions...

# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.

# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).

# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.

# ---------------------------------------------------------------------------

# Networking

# ---------------------------------------------------------------------------

# This is transmitted to the clients connecting from an external network, so it has to be a public IP or resolvable hostname

# Common settings...

# 127.0.0.1 - If you are playing alone on a test server

# 192.168.x.x - This is if you are on a 192.168.x.x type network (behind a standard consumer router) and want other computers from JUST the internal network to be able to connect

# x.x.x.x - WAN IP obtained from http://www.whatismyip.com/. This is if you want people outside your internal network to be able to connect to your server.

# If this IP is resolvable by the Login Server, just leave *.

# ---------------------------------------------------------------------------

# Default: *

ExternalHostname = 192.168.1.12



# ---------------------------------------------------------------------------

# This is transmitted to the client from the same network, so it has to be a local IP or resolvable hostname.

# This can be the internal IP such as 127.0.0.1 or the computer's IP such as 192.168.x.x.

# If this IP is resolvable by the Login Server, just leave *.

# ---------------------------------------------------------------------------

# Default: *

InternalHostname = 192.168.1.12



# Where's the Login server this gameserver should connect to

# Default: 127.0.0.1

LoginHost = 127.0.0.1



# TCP port the login server listen to for gameserver connection requests

# Default: 9014

LoginPort = 9014



# Default: *

GameserverHostname = *



# Default: 7777

GameserverPort = 7777





# ---------------------------------------------------------------------------

# Database

# ---------------------------------------------------------------------------

# Specify the appropriate driver and url for the database you're using.

# Examples:

# Driver = com.mysql.jdbc.Driver (default)

# Driver = org.hsqldb.jdbcDriver

# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver

Driver = com.mysql.jdbc.Driver

# Database URL

# URL = jdbc:mysql://localhost/l2jdb (default)

# URL = jdbc:hsqldb:hsql://localhost/l2jdb

# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password = 

URL = jdbc:mysql://localhost/l2jdb

# Database user info (default is "root" but it's not recommended)

Login = root

# Database connection password

Password = 111



# Default: 100

MaximumDbConnections = 100



# Default: 0

MaximumDbIdleTime = 0



# ---------------------------------------------------------------------------

# Misc Server Settings

# ---------------------------------------------------------------------------

# This is the server ID that the Game Server will request.

# Example: 1 = Bartz

# Default: 1

RequestServerID = 1



# True = The Login Server will give an other ID to the server if the requested ID is already reserved.

# Default: True

AcceptAlternateID = True



# Datapack root directory.

# Defaults to current directory from which the server is started unless the below line is uncommented.

#DatapackRoot = C:/Work/tmp/DataPack



# Define how many players are allowed to play simultaneously on your server.

# Default: 100

MaximumOnlineUsers = 100



# Minimum and maximum protocol revision that server allow to connect.

# Warning: You must make sure that the minimum revision is always less than or equal to the maximum revision.

# WARNING: <u><b><font color="red">Changing the protocol revision may result in incompatible communication and many errors in game!</font></b></u>

# Default: 146

MinProtocolRevision = 146



# Minimum and maximum protocol revision that server allow to connect.

# Warning: You must make sure that the minimum revision is always less than or equal to the maximum revision.

# WARNING: <u><b><font color="red">Changing the protocol revision may result in incompatible communication and many errors in game!</font></b></u>

# Default: 146

MaxProtocolRevision = 146





# ---------------------------------------------------------------------------

# Misc Player Settings

# ---------------------------------------------------------------------------



# Character name template.

# Examples:

# CnameTemplate = [A-Z][a-z]{3,3}[A-Za-z0-9]*

# The above setting will allow names with first capital letter, next three small letters,

# and any letter (case insensitive) or number, like OmfgWTF1

# CnameTemplate = [A-Z][a-z]*

# The above setting will allow names only of letters with first one capital, like Omfgwtf

# Default .* (allows any symbol)

CnameTemplate = .*



# This setting restricts names players can give to their pets.

# See CnameTemplate for details

PetNameTemplate = .*



# Maximum number of characters per account.

# Default: 7 (client limit)

CharMaxNumber = 7

Re: Не заходит у друзей на мой сервер

Цитата:

Сообщение от UFODriverr (Сообщение 72802)

KinlyDog, Ты не туда списал свой ип. Ип локалки впиши в

Код:

InternalHostname = 127.0.0.1

а не в

Код:

ExternalHostname = 192.168.1.12

Должно быть так.

Код:

# ---------------------------------------------------------------------------

# Login Server Settings

# ---------------------------------------------------------------------------

# This is the server configuration file. Here you can set up the connection information for your server.

# This was written with the assumption that you are behind a router.

# Dumbed Down Definitions...

# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.

# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).

# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.

# ---------------------------------------------------------------------------

# Networking

# ---------------------------------------------------------------------------

# This is transmitted to the clients connecting from an external network, so it has to be a public IP or resolvable hostname

# Common settings...

# 127.0.0.1 - If you are playing alone on a test server

# 192.168.x.x - This is if you are on a 192.168.x.x type network (behind a standard consumer router) and want other computers from JUST the internal network to be able to connect

# x.x.x.x - WAN IP obtained from http://www.whatismyip.com/. This is if you want people outside your internal network to be able to connect to your server.

# ---------------------------------------------------------------------------

# Default: 127.0.0.1

ExternalHostname = 192.168.1.12





# ---------------------------------------------------------------------------

# This is transmitted to the client from the same network, so it has to be a local IP or resolvable hostname.

# This can be the internal IP such as 127.0.0.1 or the computer's IP such as 192.168.x.x.

# ---------------------------------------------------------------------------

# Default: 127.0.0.1

InternalHostname = 192.168.1.12



# ---------------------------------------------------------------------------

# If you are behind a router which using its own local IP for Port Forwarding then set this to the routers

# local IP if you want people outside your internal network to be able to connect to your server.

# ---------------------------------------------------------------------------

# RouterHostname = 



# Bind ip of the LoginServer, use * to bind on all available IPs

# Default: *

LoginserverHostname = *



# Default: 2106

LoginserverPort = 2106



# The address on which login will listen for GameServers, use * to bind on all available IPs

# Default: *

LoginHostname = *



# The port on which login will listen for GameServers

# Default: 9014

LoginPort = 9014



# The delay in minutes after which the login updates the gameservers IP's (usefull when their ip is dynamic)

# Default: 15

IpUpdateTime = 15





# ---------------------------------------------------------------------------

# Security

# ---------------------------------------------------------------------------

# Default: True

LogLoginController = True



# How many times you can provide an invalid account/pass before the IP gets banned.

# Default: 10

LoginTryBeforeBan = 10



# Time you won't be able to login back again after LoginTryBeforeBan tries to login.

# Default: 600 (10 minutes)

LoginBlockAfterBan = 600



# If set to True any GameServer can register on your login's free slots

# Default: False

AcceptNewGameServer = False



# Enforce GameGuard authorization from client?

# If True, login server will kick client if the client bypassed GameGuard authentication.

# Default: False

ForceGGAuth = False



# Flood Protection. All values are in MILISECONDS.

# Default: True

EnableFloodProtection = True



# Default: 15

FastConnectionLimit = 15



# Default: 700

NormalConnectionTime = 700



# Default: 350

FastConnectionTime = 350



# Default: 50

MaxConnectionPerIP = 50





# ---------------------------------------------------------------------------

# Database

# ---------------------------------------------------------------------------

# Specify the appropriate driver and url for the database you're using.

# Examples:

# Driver = com.mysql.jdbc.Driver (default)

# Driver = org.hsqldb.jdbcDriver

# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver

Driver = com.mysql.jdbc.Driver

# Database URL

# URL = jdbc:mysql://localhost/l2jdb (default)

# URL = jdbc:hsqldb:hsql://localhost/l2jdb

# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password = 

URL = jdbc:mysql://localhost/l2jdb

# Database user info (default is "root" but it's not recommended)

Login = root

# Database connection password

Password = 111



# Default: 10

MaximumDbConnections = 10



# Default: 0

MaximumDbIdleTime = 0





# ---------------------------------------------------------------------------

# Misc.

# ---------------------------------------------------------------------------

# If False, the license (after the login) will not be shown.

# Default: True

ShowLicence = True



# Default: True

AutoCreateAccounts = True





# ---------------------------------------------------------------------------

# Developer Settings

# ---------------------------------------------------------------------------

# Default: False

Debug = False



# Default: False

Assert = False



# Default: False

Developer = False

Код:

# ---------------------------------------------------------------------------

# Game Server Settings

# ---------------------------------------------------------------------------

# This is the server configuration file. Here you can set up the connection information for your server.

# This was written with the assumption that you are behind a router.

# Dumbed Down Definitions...

# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.

# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).

# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.

# ---------------------------------------------------------------------------

# Networking

# ---------------------------------------------------------------------------

# This is transmitted to the clients connecting from an external network, so it has to be a public IP or resolvable hostname

# Common settings...

# 127.0.0.1 - If you are playing alone on a test server

# 192.168.x.x - This is if you are on a 192.168.x.x type network (behind a standard consumer router) and want other computers from JUST the internal network to be able to connect

# x.x.x.x - WAN IP obtained from http://www.whatismyip.com/. This is if you want people outside your internal network to be able to connect to your server.

# If this IP is resolvable by the Login Server, just leave *.

# ---------------------------------------------------------------------------

# Default: *

ExternalHostname = 192.168.1.12



# ---------------------------------------------------------------------------

# This is transmitted to the client from the same network, so it has to be a local IP or resolvable hostname.

# This can be the internal IP such as 127.0.0.1 or the computer's IP such as 192.168.x.x.

# If this IP is resolvable by the Login Server, just leave *.

# ---------------------------------------------------------------------------

# Default: *

InternalHostname = 192.168.1.12



# Where's the Login server this gameserver should connect to

# Default: 127.0.0.1

LoginHost = 127.0.0.1



# TCP port the login server listen to for gameserver connection requests

# Default: 9014

LoginPort = 9014



# Default: *

GameserverHostname = *



# Default: 7777

GameserverPort = 7777





# ---------------------------------------------------------------------------

# Database

# ---------------------------------------------------------------------------

# Specify the appropriate driver and url for the database you're using.

# Examples:

# Driver = com.mysql.jdbc.Driver (default)

# Driver = org.hsqldb.jdbcDriver

# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver

Driver = com.mysql.jdbc.Driver

# Database URL

# URL = jdbc:mysql://localhost/l2jdb (default)

# URL = jdbc:hsqldb:hsql://localhost/l2jdb

# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password = 

URL = jdbc:mysql://localhost/l2jdb

# Database user info (default is "root" but it's not recommended)

Login = root

# Database connection password

Password = 111



# Default: 100

MaximumDbConnections = 100



# Default: 0

MaximumDbIdleTime = 0



# ---------------------------------------------------------------------------

# Misc Server Settings

# ---------------------------------------------------------------------------

# This is the server ID that the Game Server will request.

# Example: 1 = Bartz

# Default: 1

RequestServerID = 1



# True = The Login Server will give an other ID to the server if the requested ID is already reserved.

# Default: True

AcceptAlternateID = True



# Datapack root directory.

# Defaults to current directory from which the server is started unless the below line is uncommented.

#DatapackRoot = C:/Work/tmp/DataPack



# Define how many players are allowed to play simultaneously on your server.

# Default: 100

MaximumOnlineUsers = 100



# Minimum and maximum protocol revision that server allow to connect.

# Warning: You must make sure that the minimum revision is always less than or equal to the maximum revision.

# WARNING: <u><b><font color="red">Changing the protocol revision may result in incompatible communication and many errors in game!</font></b></u>

# Default: 146

MinProtocolRevision = 146



# Minimum and maximum protocol revision that server allow to connect.

# Warning: You must make sure that the minimum revision is always less than or equal to the maximum revision.

# WARNING: <u><b><font color="red">Changing the protocol revision may result in incompatible communication and many errors in game!</font></b></u>

# Default: 146

MaxProtocolRevision = 146





# ---------------------------------------------------------------------------

# Misc Player Settings

# ---------------------------------------------------------------------------



# Character name template.

# Examples:

# CnameTemplate = [A-Z][a-z]{3,3}[A-Za-z0-9]*

# The above setting will allow names with first capital letter, next three small letters,

# and any letter (case insensitive) or number, like OmfgWTF1

# CnameTemplate = [A-Z][a-z]*

# The above setting will allow names only of letters with first one capital, like Omfgwtf

# Default .* (allows any symbol)

CnameTemplate = .*



# This setting restricts names players can give to their pets.

# See CnameTemplate for details

PetNameTemplate = .*



# Maximum number of characters per account.

# Default: 7 (client limit)

CharMaxNumber = 7

Свой IP надо и в интернал и в икстернал хостнейм писать?

Re: Не заходит у друзей на мой сервер

KinlyDog, Нет надо только в интернал (Икстернал для интернета.) Однако если он будет и там и там никому от этого плохо не будет )