Сообщений: 831
Тем: 125
Зарегистрирован: Jan 2009
Репутация:
404
Вот люди... столкнулся с такой проблемой.... вообщем когда взялся за перевод квестов столкнулся с проблемой русского названия квестов...
1) я точно не знаю где изменять его но как я понял тут (красным)
Открыть спойлер
Спойлер# Made by Mr. Have fun! Version 0.2
import sys
from net.sf.l2j.gameserver.model.quest import State
from net.sf.l2j.gameserver.model.quest import QuestState
from net.sf.l2j.gameserver.model.quest.jython import QuestJython as JQuest
qn = "1_LettersOfLove1"
#NPCs
DARIN = 30048
ROXXY = 30006
BAULRO = 30033
#ITEMS
DARINGS_LETTER = 687
RAPUNZELS_KERCHIEF = 688
DARINGS_RECEIPT = 1079
BAULS_POTION = 1080
#REWARD
NECKLACE = 906
class Quest (JQuest) :
def __init__(self,id,name,descr):
JQuest.__init__(self,id,name,descr)
self.questItemIds = [DARINGS_LETTER, RAPUNZELS_KERCHIEF, DARINGS_RECEIPT, BAULS_POTION]
def onAdvEvent (self,event,npc, player) :
htmltext = event
st = player.getQuestState(qn)
if not st : return
if event == "30048-06.htm" :
st.set("cond","1")
st.setState(State.STARTED)
st.playSound("ItemSound.quest_accept")
if st.getQuestItemsCount(DARINGS_LETTER) == 0 :
st.giveItems(DARINGS_LETTER,1)
return htmltext
def onTalk (self,npc,player):
st = player.getQuestState(qn)
htmltext = "<html><body>You are either not on a quest that involves this NPC, or you don't meet this NPC's minimum quest requirements.</body></html>"
if not st: return htmltext
npcId = npc.getNpcId()
id = st.getState()
cond = st.getInt("cond")
ItemsCount_DL = st.getQuestItemsCount(DARINGS_LETTER)
ItemsCount_RK = st.getQuestItemsCount(RAPUNZELS_KERCHIEF)
ItemsCount_DR = st.getQuestItemsCount(DARINGS_RECEIPT)
ItemsCount_BP = st.getQuestItemsCount(BAULS_POTION)
if id == State.COMPLETED :
htmltext = "<html><body>This quest has already been completed.</body></html>"
elif npcId == DARIN and id == State.CREATED:
if player.getLevel() >= 2 :
if cond < 15 :
htmltext = "30048-02.htm"
else:
htmltext = "30048-01.htm"
st.exitQuest(1)
else:
htmltext = "<html><body>Quest for characters level 2 and above.</body></html>"
st.exitQuest(1)
elif id == State.STARTED :
if npcId == ROXXY and cond:
if ItemsCount_RK == 0 and ItemsCount_DL :
htmltext = "30006-01.htm"
st.takeItems(DARINGS_LETTER,-1)
st.giveItems(RAPUNZELS_KERCHIEF,1)
st.set("cond","2")
st.playSound("ItemSound.quest_middle")
elif ItemsCount_BP or ItemsCount_DR :
htmltext = "30006-03.htm"
elif ItemsCount_RK :
htmltext = "30006-02.htm"
elif npcId == DARIN and cond and ItemsCount_RK > 0:
htmltext = "30048-08.htm"
st.takeItems(RAPUNZELS_KERCHIEF,-1)
st.giveItems(DARINGS_RECEIPT,1)
st.set("cond","3")
st.playSound("ItemSound.quest_middle")
elif npcId == BAULRO and cond:
if ItemsCount_DR > 0 :
htmltext = "30033-01.htm"
st.takeItems(DARINGS_RECEIPT,-1)
st.giveItems(BAULS_POTION,1)
st.set("cond","4")
st.playSound("ItemSound.quest_middle")
elif ItemsCount_BP > 0 :
htmltext = "30033-02.htm"
elif npcId == DARIN and cond and ItemsCount_RK == 0:
if ItemsCount_DR > 0 :
htmltext = "30048-09.htm"
elif ItemsCount_BP > 0 :
htmltext = "30048-10.htm"
st.takeItems(BAULS_POTION,-1)
st.giveItems(57,2466)
st.giveItems(NECKLACE,1)
st.addExpAndSp(5672,446)
st.unset("cond")
st.exitQuest(False)
st.playSound("ItemSound.quest_finish")
else:
htmltext = "30048-07.htm"
return htmltext
QUEST = Quest(1,qn,"Letters Of Love1")
QUEST.addStartNpc(DARIN)
QUEST.addTalkId(DARIN)
QUEST.addTalkId(ROXXY)
QUEST.addTalkId(BAULRO)
если тут, то как его изменить если кирилицу сервер не читает...
а если же в другом месте, то где?
Сообщений: 6,450
Тем: 262
Зарегистрирован: Nov 2007
Репутация:
44,165
Куда-то вы не туда полезли... questname-e.dat
Цитата:#tag quest_id quest_prog main_name prog_name
1 1 1 Любовное послание Доставка послания
Сообщений: 831
Тем: 125
Зарегистрирован: Jan 2009
Репутация:
404
01-24-2010, 12:45 PM
(Сообщение последний раз редактировалось: 01-24-2010, 06:05 PM krisadr.)
да неее Вы не поняли.... папка то у меня пропатченая от самого Рус оффа--- значит со стороны клиента все на русском...
Но при диологе с нпс после нажатие ссылки Quest выскакивает (на английсков языке) ссылки на выбор квестов (если их больше 1)!!! вот пример...
![[Изображение: 4gzx2006515.jpg]](http://www.imgup.ru/images_small/4gzx2006515.jpg)
Добавлено через 3 часа 27 минут
PROGRAMMATOR Написал:Куда-то вы не туда полезли... questname-e.dat Хмм.. ну такс... есть идеи?:??
Добавлено через 3 часа 54 минуты
походу я все правельно делал, но увы в скрипте кирилицы быть не может... тогжа вопрос .... может быть вместо
t.set("cond","4")
st.playSound("ItemSound.quest_middle")
elif ItemsCount_BP > 0 :
htmltext = "30033-02.htm"
elif npcId == DARIN and cond and ItemsCount_RK == 0:
if ItemsCount_DR > 0 :
htmltext = "30048-09.htm"
elif ItemsCount_BP > 0 :
htmltext = "30048-10.htm"
st.takeItems(BAULS_POTION,-1)
st.giveItems(57,2466)
st.giveItems(NECKLACE,1)
st.addExpAndSp(5672,446)
st.unset("cond")
st.exitQuest(False)
st.playSound("ItemSound.quest_finish")
else:
htmltext = "30048-07.htm"
return htmltext
QUEST = Quest(1,qn," Letters Of Love1")
QUEST.addStartNpc(DARIN)
QUEST.addTalkId(DARIN)
QUEST.addTalkId(ROXXY)
QUEST.addTalkId(BAULRO)
сделать как нить типо так
QUEST = Quest(1,qn," htmltext = "32173-11111.htm"")
32173-11111.htm в этом файлике будит название квеста...
Добавлено через 3 часа 59 минут
или нада каким то образом в сервер впихнуть поддержку кирилицы.... вообщем кто поможет скажу Огромное СПАСИБО!
Добавлено через 5 часов 20 минут
походу ниукого идей нет(
Сообщений: 831
Тем: 125
Зарегистрирован: Jan 2009
Репутация:
404
ененененен народ UP темке!!!
Сообщений: 268
Тем: 90
Зарегистрирован: Jun 2008
Репутация:
766
Переводится это не тут, переводится это в html файлах, __init__.py вообще трогать в данном случае не надо.
Сообщений: 831
Тем: 125
Зарегистрирован: Jan 2009
Репутация:
404
01-25-2010, 05:57 PM
(Сообщение последний раз редактировалось: 01-25-2010, 11:14 PM krisadr.)
парень, ты не прав ... изменив ту красную строчку (в самом низу) я проверял и само название менялось! а вот когда писал сусское название то в игре одни иероглифы и вопросы... (это если даже в ютф 8)
Добавлено через 1 час 54 минуты
ОМГ... что никто не знает как это перевести?
Открыть спойлер
СпойлерPHP код: <?php
/*
* This program is free software: you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free Software
* Foundation, either version 3 of the License, or (at your option) any later
* version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
* FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
package net.sf.l2j;
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStreamReader;
import net.sf.l2j.gameserver.util.StringUtil;
/**
* Encodes and decodes to and from Base64 notation.
*
* The source is based on the work of Robert Harder
*
* <p>
* I am placing this code in the Public Domain. Do with it as you will. This
* software comes with no guarantees or warranties but with plenty of
* well-wishing instead! Please visit <a
* href="http://iharder.net/xmlizable">http://iharder.net/base64</a>
* periodically to check for updates or to contribute improvements.
* </p>
*
* @author Robert Harder
* @author rob@iharder.net
* @version 2.0
*/
public class Base64
{
/* P U B L I C F I E L D S */
/** No options specified. Value is zero. */
public final static int NO_OPTIONS = 0;
/** Specify encoding. */
public final static int ENCODE = 1;
/** Specify decoding. */
public final static int DECODE = 0;
/** Specify that data should be gzip-compressed. */
public final static int GZIP = 2;
/** Don't break lines when encoding (violates strict Base64 specification) */
public final static int DONT_BREAK_LINES = 8;
/* P R I V A T E F I E L D S */
/** Maximum line length (76) of Base64 output. */
private final static int MAX_LINE_LENGTH = 76;
/** The equals sign (=) as a byte. */
private final static byte EQUALS_SIGN = (byte) '=';
/** The new line character (\n) as a byte. */
private final static byte NEW_LINE = (byte) '\n';
/** Preferred encoding. */
private final static String PREFERRED_ENCODING = "UTF-8";
/** The 64 valid Base64 values. */
private final static byte[] ALPHABET;
private final static byte[] _NATIVE_ALPHABET = /* May be something funny like EBCDIC */
{ (byte) 'A', (byte) 'B', (byte) 'C', (byte) 'D', (byte) 'E', (byte) 'F', (byte) 'G',
(byte) 'H', (byte) 'I', (byte) 'J', (byte) 'K', (byte) 'L', (byte) 'M', (byte) 'N',
(byte) 'O', (byte) 'P', (byte) 'Q', (byte) 'R', (byte) 'S', (byte) 'T', (byte) 'U',
(byte) 'V', (byte) 'W', (byte) 'X', (byte) 'Y', (byte) 'Z', (byte) 'a', (byte) 'b',
(byte) 'c', (byte) 'd', (byte) 'e', (byte) 'f', (byte) 'g', (byte) 'h', (byte) 'i',
(byte) 'j', (byte) 'k', (byte) 'l', (byte) 'm', (byte) 'n', (byte) 'o', (byte) 'p',
(byte) 'q', (byte) 'r', (byte) 's', (byte) 't', (byte) 'u', (byte) 'v', (byte) 'w',
(byte) 'x', (byte) 'y', (byte) 'z', (byte) '0', (byte) '1', (byte) '2', (byte) '3',
(byte) '4', (byte) '5', (byte) '6', (byte) '7', (byte) '8', (byte) '9', (byte) '+',
(byte) '/' };
public static void main(String[] args) throws IOException
{
BufferedReader bf = new BufferedReader(new InputStreamReader(System.in));
System.out.print("Enter String to encode: ");
System.out.println(Base64.encodeBytes(bf.readLine().getBytes()));
}
/** Determine which ALPHABET to use. */
static
{
byte[] __bytes;
try
{
__bytes = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/".getBytes(PREFERRED_ENCODING);
} // end try
catch (java.io.UnsupportedEncodingException use)
{
__bytes = _NATIVE_ALPHABET; // Fall back to native encoding
} // end catch
ALPHABET = __bytes;
} // end static
/**
* Translates a Base64 value to either its 6-bit reconstruction value or a
* negative number indicating some other meaning.
**/
final static byte[] DECODABET = { -9, -9, -9, -9, -9, -9, -9, -9, -9, // Decimal 0 - 8
-5, -5, // Whitespace: Tab and Linefeed
-9, -9, // Decimal 11 - 12
-5, // Whitespace: Carriage Return
-9, -9, -9, -9, -9, -9, -9, -9, -9, -9, -9, -9, -9, // Decimal 14 - 26
-9, -9, -9, -9, -9, // Decimal 27 - 31
-5, // Whitespace: Space
-9, -9, -9, -9, -9, -9, -9, -9, -9, -9, // Decimal 33 - 42
62, // Plus sign at decimal 43
-9, -9, -9, // Decimal 44 - 46
63, // Slash at decimal 47
52, 53, 54, 55, 56, 57, 58, 59, 60, 61, // Numbers zero through nine
-9, -9, -9, // Decimal 58 - 60
-1, // Equals sign at decimal 61
-9, -9, -9, // Decimal 62 - 64
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, // Letters 'A' through 'N'
14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, // Letters 'O' through 'Z'
-9, -9, -9, -9, -9, -9, // Decimal 91 - 96
26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, // Letters 'a' through 'm'
39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, // Letters 'n' through 'z'
-9, -9, -9, -9 // Decimal 123 - 126
/*
* ,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9, // Decimal 127 - 139
* -9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9, // Decimal 140 - 152
* -9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9, // Decimal 153 - 165
* -9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9, // Decimal 166 - 178
* -9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9, // Decimal 179 - 191
* -9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9, // Decimal 192 - 204
* -9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9, // Decimal 205 - 217
* -9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9, // Decimal 218 - 230
* -9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9, // Decimal 231 - 243
* -9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9 // Decimal 244 - 255
*/
};
// private final static byte BAD_ENCODING = -9; // Indicates error in encoding
private final static byte WHITE_SPACE_ENC = -5; // Indicates white space in encoding
private final static byte EQUALS_SIGN_ENC = -1; // Indicates equals sign in encoding
/** Defeats instantiation. */
private Base64()
{
}
/* E N C O D I N G M E T H O D S */
// /**
// * Encodes the first three bytes of array <var>threeBytes</var>
// * and returns a four-byte array in Base64 notation.
// *
// * @param threeBytes the array to convert
// * @return four byte array in Base64 notation.
// * @since 1.3
// */
// private static byte[] encode3to4( byte[] threeBytes )
// {
// return encode3to4( threeBytes, 3 );
// } // end encodeToBytes
// /**
// * Encodes up to the first three bytes of array <var>threeBytes</var>
// * and returns a four-byte array in Base64 notation.
// * The actual number of significant bytes in your array is
// * given by <var>numSigBytes</var>.
// * The array <var>threeBytes</var> needs only be as big as
// * <var>numSigBytes</var>.
// *
// * @param threeBytes the array to convert
// * @param numSigBytes the number of significant bytes in your array
// * @return four byte array in Base64 notation.
// * @since 1.3
// */
// private static byte[] encode3to4( byte[] threeBytes, int numSigBytes )
// {
// byte[] dest = new byte[4];
// encode3to4( threeBytes, 0, numSigBytes, dest, 0 );
// return dest;
// }
/**
* Encodes up to the first three bytes of array <var>threeBytes</var> and
* returns a four-byte array in Base64 notation. The actual number of
* significant bytes in your array is given by <var>numSigBytes</var>. The
* array <var>threeBytes</var> needs only be as big as
* <var>numSigBytes</var>. Code can reuse a byte array by passing a
* four-byte array as <var>b4</var>.
*
* @param b4
* A reusable byte array to reduce array instantiation
* @param threeBytes
* the array to convert
* @param numSigBytes
* the number of significant bytes in your array
* @return four byte array in Base64 notation.
* @since 1.5.1
*/
static byte[] encode3to4(byte[] b4, byte[] threeBytes, int numSigBytes)
{
encode3to4(threeBytes, 0, numSigBytes, b4, 0);
return b4;
} // end encode3to4
/**
* Encodes up to three bytes of the array <var>source</var> and writes the
* resulting four Base64 bytes to <var>destination</var>. The source and
* destination arrays can be manipulated anywhere along their length by
* specifying <var>srcOffset</var> and <var>destOffset</var>. This method
* does not check to make sure your arrays are large enough to accomodate
* <var>srcOffset</var> + 3 for the <var>source</var> array or
* <var>destOffset</var> + 4 for the <var>destination</var> array. The
* actual number of significant bytes in your array is given by
* <var>numSigBytes</var>.
*
* @param source
* the array to convert
* @param srcOffset
* the index where conversion begins
* @param numSigBytes
* the number of significant bytes in your array
* @param destination
* the array to hold the conversion
* @param destOffset
* the index where output will be put
* @return the <var>destination</var> array
* @since 1.3
*/
static byte[] encode3to4(byte[] source, int srcOffset, int numSigBytes, byte[] destination,
int destOffset)
{
// 1 2 3
// 01234567890123456789012345678901 Bit position
// --------000000001111111122222222 Array position from threeBytes
// --------| || || || | Six bit groups to index ALPHABET
// >>18 >>12 >> 6 >> 0 Right shift necessary
// 0x3f 0x3f 0x3f Additional AND
// Create buffer with zero-padding if there are only one or two
// significant bytes passed in the array.
// We have to shift left 24 in order to flush out the 1's that appear
// when Java treats a value as negative that is cast from a byte to an
// int.
int inBuff = (numSigBytes > 0 ? ((source[srcOffset] << 24) >>> 8) : 0)
| (numSigBytes > 1 ? ((source[srcOffset + 1] << 24) >>> 16) : 0)
| (numSigBytes > 2 ? ((source[srcOffset + 2] << 24) >>> 24) : 0);
switch (numSigBytes)
{
case 3:
destination[destOffset] = ALPHABET[(inBuff >>> 18)];
destination[destOffset + 1] = ALPHABET[(inBuff >>> 12) & 0x3f];
destination[destOffset + 2] = ALPHABET[(inBuff >>> 6) & 0x3f];
destination[destOffset + 3] = ALPHABET[(inBuff) & 0x3f];
return destination;
case 2:
destination[destOffset] = ALPHABET[(inBuff >>> 18)];
destination[destOffset + 1] = ALPHABET[(inBuff >>> 12) & 0x3f];
destination[destOffset + 2] = ALPHABET[(inBuff >>> 6) & 0x3f];
destination[destOffset + 3] = EQUALS_SIGN;
return destination;
case 1:
destination[destOffset] = ALPHABET[(inBuff >>> 18)];
destination[destOffset + 1] = ALPHABET[(inBuff >>> 12) & 0x3f];
destination[destOffset + 2] = EQUALS_SIGN;
destination[destOffset + 3] = EQUALS_SIGN;
return destination;
default:
return destination;
} // end switch
} // end encode3to4
/**
* Serializes an object and returns the Base64-encoded version of that
* serialized object. If the object cannot be serialized or there is another
* error, the method will return <tt>null</tt>. The object is not
* GZip-compressed before being encoded.
*
* @param serializableObject
* The object to encode
* @return The Base64-encoded object
* @since 1.4
*/
public static String encodeObject(java.io.Serializable serializableObject)
{
return encodeObject(serializableObject, NO_OPTIONS);
} // end encodeObject
/**
* Serializes an object and returns the Base64-encoded version of that
* serialized object. If the object cannot be serialized or there is another
* error, the method will return <tt>null</tt>.
* <p>
* Valid options:
*
* <pre>
* GZIP: gzip-compresses object before encoding it.
* DONT_BREAK_LINES: don't break lines at 76 characters
* <i>Note: Technically, this makes your encoding non-compliant.</i>
* </pre>
* <p>
* Example: <code>encodeObject( myObj, Base64.GZIP )</code> or
* <p>
* Example:
* <code>encodeObject( myObj, Base64.GZIP | Base64.DONT_BREAK_LINES )</code>
*
* @param serializableObject
* The object to encode
* @options Specified options
* @return The Base64-encoded object
* @see Base64#GZIP
* @see Base64#DONT_BREAK_LINES
* @since 2.0
*/
public static String encodeObject(java.io.Serializable serializableObject, int options)
{
// Streams
java.io.ByteArrayOutputStream baos = null;
java.io.OutputStream b64os = null;
java.io.ObjectOutputStream oos = null;
java.util.zip.GZIPOutputStream gzos = null;
// Isolate options
int gzip = (options & GZIP);
int dontBreakLines = (options & DONT_BREAK_LINES);
try
{
// ObjectOutputStream -> (GZIP) -> Base64 -> ByteArrayOutputStream
baos = new java.io.ByteArrayOutputStream();
b64os = new Base64.OutputStream(baos, ENCODE | dontBreakLines);
// GZip?
if (gzip == GZIP)
{
gzos = new java.util.zip.GZIPOutputStream(b64os);
oos = new java.io.ObjectOutputStream(gzos);
} // end if: gzip
else
oos = new java.io.ObjectOutputStream(b64os);
oos.writeObject(serializableObject);
} // end try
catch (java.io.IOException e)
{
e.printStackTrace();
return null;
} // end catch
finally
{
try
{
oos.close();
}
catch (Exception e)
{
}
try
{
gzos.close();
}
catch (Exception e)
{
}
try
{
b64os.close();
}
catch (Exception e)
{
}
try
{
baos.close();
}
catch (Exception e)
{
}
} // end finally
// Return value according to relevant encoding.
try
{
return new String(baos.toByteArray(), PREFERRED_ENCODING);
} // end try
catch (java.io.UnsupportedEncodingException uue)
{
return new String(baos.toByteArray());
} // end catch
} // end encode
/**
* Encodes a byte array into Base64 notation. Does not GZip-compress data.
*
* @param source
* The data to convert
* @since 1.4
*/
public static String encodeBytes(byte[] source)
{
return encodeBytes(source, 0, source.length, NO_OPTIONS);
} // end encodeBytes
/**
* Encodes a byte array into Base64 notation.
* <p>
* Valid options:
*
* <pre>
* GZIP: gzip-compresses object before encoding it.
* DONT_BREAK_LINES: don't break lines at 76 characters
* <i>Note: Technically, this makes your encoding non-compliant.</i>
* </pre>
* <p>
* Example: <code>encodeBytes( myData, Base64.GZIP )</code> or
* <p>
* Example:
* <code>encodeBytes( myData, Base64.GZIP | Base64.DONT_BREAK_LINES )</code>
*
*
* @param source
* The data to convert
* @param options
* Specified options
* @see Base64#GZIP
* @see Base64#DONT_BREAK_LINES
* @since 2.0
*/
public static String encodeBytes(byte[] source, int options)
{
return encodeBytes(source, 0, source.length, options);
} // end encodeBytes
/**
* Encodes a byte array into Base64 notation. Does not GZip-compress data.
*
* @param source
* The data to convert
* @param off
* Offset in array where conversion should begin
* @param len
* Length of data to convert
* @since 1.4
*/
public static String encodeBytes(byte[] source, int off, int len)
{
return encodeBytes(source, off, len, NO_OPTIONS);
} // end encodeBytes
/**
* Encodes a byte array into Base64 notation.
* <p>
* Valid options:
*
* <pre>
* GZIP: gzip-compresses object before encoding it.
* DONT_BREAK_LINES: don't break lines at 76 characters
* <i>Note: Technically, this makes your encoding non-compliant.</i>
* </pre>
* <p>
* Example: <code>encodeBytes( myData, Base64.GZIP )</code> or
* <p>
* Example:
* <code>encodeBytes( myData, Base64.GZIP | Base64.DONT_BREAK_LINES )</code>
*
*
* @param source
* The data to convert
* @param off
* Offset in array where conversion should begin
* @param len
* Length of data to convert
* @param breakLines
* Break lines at 80 characters or less.
* @param options
* Specified options
* @see Base64#GZIP
* @see Base64#DONT_BREAK_LINES
* @since 2.0
*/
public static String encodeBytes(byte[] source, int off, int len, int options)
{
// Isolate options
int dontBreakLines = (options & DONT_BREAK_LINES);
int gzip = (options & GZIP);
// Compress?
if (gzip == GZIP)
{
java.io.ByteArrayOutputStream baos = null;
java.util.zip.GZIPOutputStream gzos = null;
Base64.OutputStream b64os = null;
try
{
// GZip -> Base64 -> ByteArray
baos = new java.io.ByteArrayOutputStream();
b64os = new Base64.OutputStream(baos, ENCODE | dontBreakLines);
gzos = new java.util.zip.GZIPOutputStream(b64os);
gzos.write(source, off, len);
gzos.close();
} // end try
catch (java.io.IOException e)
{
e.printStackTrace();
return null;
} // end catch
finally
{
try
{
gzos.close();
}
catch (Exception e)
{
}
try
{
b64os.close();
}
catch (Exception e)
{
}
try
{
baos.close();
}
catch (Exception e)
{
}
} // end finally
// Return value according to relevant encoding.
try
{
return new String(baos.toByteArray(), PREFERRED_ENCODING);
} // end try
catch (java.io.UnsupportedEncodingException uue)
{
return new String(baos.toByteArray());
} // end catch
} // end if: compress
// Convert option to boolean in way that code likes it.
boolean breakLines = dontBreakLines == 0;
int len43 = len * 4 / 3;
byte[] outBuff = new byte[(len43) // Main 4:3
+ ((len % 3) > 0 ? 4 : 0) // Account for padding
+ (breakLines ? (len43 / MAX_LINE_LENGTH) : 0)]; // New lines
int d = 0;
int e = 0;
int len2 = len - 2;
int lineLength = 0;
for (; d < len2; d += 3, e += 4)
{
encode3to4(source, d + off, 3, outBuff, e);
lineLength += 4;
if (breakLines && lineLength == MAX_LINE_LENGTH)
{
outBuff[e + 4] = NEW_LINE;
e++;
lineLength = 0;
} // end if: end of line
} // en dfor: each piece of array
if (d < len)
{
encode3to4(source, d + off, len - d, outBuff, e);
e += 4;
} // end if: some padding needed
// Return value according to relevant encoding.
try
{
return new String(outBuff, 0, e, PREFERRED_ENCODING);
} // end try
catch (java.io.UnsupportedEncodingException uue)
{
return new String(outBuff, 0, e);
} // end catch
// end else: don't compress
} // end encodeBytes
/* D E C O D I N G M E T H O D S */
// /**
// * Decodes the first four bytes of array <var>fourBytes</var>
// * and returns an array up to three bytes long with the
// * decoded values.
// *
// * @param fourBytes the array with Base64 content
// * @return array with decoded values
// * @since 1.3
// */
// private static byte[] decode4to3( byte[] fourBytes )
// {
// byte[] outBuff1 = new byte[3];
// int count = decode4to3( fourBytes, 0, outBuff1, 0 );
// byte[] outBuff2 = new byte[ count ];
//
// for( int i = 0; i < count; i++ )
// outBuff2[i] = outBuff1[i];
//
// return outBuff2;
// }
/**
* Decodes four bytes from array <var>source</var> and writes the resulting
* bytes (up to three of them) to <var>destination</var>. The source and
* destination arrays can be manipulated anywhere along their length by
* specifying <var>srcOffset</var> and <var>destOffset</var>. This method
* does not check to make sure your arrays are large enough to accomodate
* <var>srcOffset</var> + 4 for the <var>source</var> array or
* <var>destOffset</var> + 3 for the <var>destination</var> array. This
* method returns the actual number of bytes that were converted from the
* Base64 encoding.
*
*
* @param source
* the array to convert
* @param srcOffset
* the index where conversion begins
* @param destination
* the array to hold the conversion
* @param destOffset
* the index where output will be put
* @return the number of decoded bytes converted
* @since 1.3
*/
static int decode4to3(byte[] source, int srcOffset, byte[] destination, int destOffset)
{
// Example: Dk==
if (source[srcOffset + 2] == EQUALS_SIGN)
{
// Two ways to do the same thing. Don't know which way I like best.
// int outBuff = ( ( DECODABET[ source[ srcOffset ] ] << 24 ) >>> 6
// )
// | ( ( DECODABET[ source[ srcOffset + 1] ] << 24 ) >>> 12 );
int outBuff = ((DECODABET[source[srcOffset]] & 0xFF) << 18)
| ((DECODABET[source[srcOffset + 1]] & 0xFF) << 12);
destination[destOffset] = (byte) (outBuff >>> 16);
return 1;
}
// Example: DkL=
else if (source[srcOffset + 3] == EQUALS_SIGN)
{
// Two ways to do the same thing. Don't know which way I like best.
// int outBuff = ( ( DECODABET[ source[ srcOffset ] ] << 24 ) >>> 6
// )
// | ( ( DECODABET[ source[ srcOffset + 1 ] ] << 24 ) >>> 12 )
// | ( ( DECODABET[ source[ srcOffset + 2 ] ] << 24 ) >>> 18 );
int outBuff = ((DECODABET[source[srcOffset]] & 0xFF) << 18)
| ((DECODABET[source[srcOffset + 1]] & 0xFF) << 12)
| ((DECODABET[source[srcOffset + 2]] & 0xFF) << 6);
destination[destOffset] = (byte) (outBuff >>> 16);
destination[destOffset + 1] = (byte) (outBuff >>> 8);
return 2;
}
// Example: DkLE
else
{
try
{
// Two ways to do the same thing. Don't know which way I like
// best.
// int outBuff = ( ( DECODABET[ source[ srcOffset ] ] << 24 )
// >>> 6 )
// | ( ( DECODABET[ source[ srcOffset + 1 ] ] << 24 ) >>> 12 )
// | ( ( DECODABET[ source[ srcOffset + 2 ] ] << 24 ) >>> 18 )
// | ( ( DECODABET[ source[ srcOffset + 3 ] ] << 24 ) >>> 24 );
int outBuff = ((DECODABET[source[srcOffset]] & 0xFF) << 18)
| ((DECODABET[source[srcOffset + 1]] & 0xFF) << 12)
| ((DECODABET[source[srcOffset + 2]] & 0xFF) << 6)
| ((DECODABET[source[srcOffset + 3]] & 0xFF));
destination[destOffset] = (byte) (outBuff >> 16);
destination[destOffset + 1] = (byte) (outBuff >> 8);
destination[destOffset + 2] = (byte) (outBuff);
return 3;
}
catch (Exception e)
{
System.out.println(StringUtil.concat(String.valueOf(source[srcOffset]), ": ", String.valueOf(DECODABET[source[srcOffset]])));
System.out.println(StringUtil.concat(String.valueOf(source[srcOffset + 1]), ": ", String.valueOf(DECODABET[source[srcOffset + 1]])));
System.out.println(StringUtil.concat(String.valueOf(source[srcOffset + 2]), ": ", String.valueOf(DECODABET[source[srcOffset + 2]])));
System.out.println(StringUtil.concat(String.valueOf(source[srcOffset + 3]), ": ", String.valueOf(DECODABET[source[srcOffset + 3]])));
return -1;
} // end catch
}
} // end decodeToBytes
/**
* Very low-level access to decoding ASCII characters in the form of a byte
* array. Does not support automatically gunzipping or any other "fancy"
* features.
*
* @param source
* The Base64 encoded data
* @param off
* The offset of where to begin decoding
* @param len
* The length of characters to decode
* @return decoded data
* @since 1.3
*/
public static byte[] decode(byte[] source, int off, int len)
{
int len34 = len * 3 / 4;
byte[] outBuff = new byte[len34]; // Upper limit on size of output
int outBuffPosn = 0;
byte[] b4 = new byte[4];
int b4Posn = 0;
int i = 0;
byte sbiCrop = 0;
byte sbiDecode = 0;
for (i = off; i < off + len; i++)
{
sbiCrop = (byte) (source[i] & 0x7f); // Only the low seven bits
sbiDecode = DECODABET[sbiCrop];
if (sbiDecode >= WHITE_SPACE_ENC) // White space, Equals sign or
// better
{
if (sbiDecode >= EQUALS_SIGN_ENC)
{
b4[b4Posn++] = sbiCrop;
if (b4Posn > 3)
{
outBuffPosn += decode4to3(b4, 0, outBuff, outBuffPosn);
b4Posn = 0;
// If that was the equals sign, break out of 'for' loop
if (sbiCrop == EQUALS_SIGN)
break;
} // end if: quartet built
} // end if: equals sign or better
} // end if: white space, equals sign or better
else
{
System.err.println(StringUtil.concat("Bad Base64 input character at ", String.valueOf(i), ": ", String.valueOf(source[i]), "(decimal)"));
return null;
} // end else:
} // each input character
byte[] out = new byte[outBuffPosn];
System.arraycopy(outBuff, 0, out, 0, outBuffPosn);
return out;
} // end decode
/**
* Decodes data from Base64 notation, automatically detecting
* gzip-compressed data and decompressing it.
*
* @param s
* the string to decode
* @return the decoded data
* @since 1.4
*/
public static byte[] decode(String s)
{
byte[] bytes;
try
{
bytes = s.getBytes(PREFERRED_ENCODING);
} // end try
catch (java.io.UnsupportedEncodingException uee)
{
bytes = s.getBytes();
} // end catch
// </change>
// Decode
bytes = decode(bytes, 0, bytes.length);
// Check to see if it's gzip-compressed
// GZIP Magic Two-Byte Number: 0x8b1f (35615)
if (bytes != null && // In case decoding returned null
bytes.length >= 2)
{
int head = (bytes[0] & 0xff) | ((bytes[1] << 8) & 0xff00);
if (bytes.length >= 4 && // Don't want to get ArrayIndexOutOfBounds
// exception
java.util.zip.GZIPInputStream.GZIP_MAGIC == head)
{
java.io.ByteArrayInputStream bais = null;
java.util.zip.GZIPInputStream gzis = null;
java.io.ByteArrayOutputStream baos = null;
byte[] buffer = new byte[2048];
int length = 0;
try
{
baos = new java.io.ByteArrayOutputStream();
bais = new java.io.ByteArrayInputStream(bytes);
gzis = new java.util.zip.GZIPInputStream(bais);
while ((length = gzis.read(buffer)) >= 0)
{
baos.write(buffer, 0, length);
} // end while: reading input
// No error? Get new bytes.
bytes = baos.toByteArray();
} // end try
catch (java.io.IOException e)
{
// Just return originally-decoded bytes
} // end catch
finally
{
try
{
baos.close();
}
catch (Exception e)
{
}
try
{
gzis.close();
}
catch (Exception e)
{
}
try
{
bais.close();
}
catch (Exception e)
{
}
} // end finally
} // end if: gzipped
} // end if: bytes.length >= 2
return bytes;
} // end decode
/**
* Attempts to decode Base64 data and deserialize a Java Object within.
* Returns <tt>null</tt> if there was an error.
*
* @param encodedObject
* The Base64 data to decode
* @return The decoded and deserialized object
* @since 1.5
*/
public static Object decodeToObject(String encodedObject)
{
// Decode and gunzip if necessary
byte[] objBytes = decode(encodedObject);
java.io.ByteArrayInputStream bais = null;
java.io.ObjectInputStream ois = null;
Object obj = null;
try
{
bais = new java.io.ByteArrayInputStream(objBytes);
ois = new java.io.ObjectInputStream(bais);
obj = ois.readObject();
} // end try
catch (java.io.IOException e)
{
e.printStackTrace();
obj = null;
} // end catch
catch (java.lang.ClassNotFoundException e)
{
e.printStackTrace();
obj = null;
} // end catch
finally
{
try
{
bais.close();
}
catch (Exception e)
{
}
try
{
ois.close();
}
catch (Exception e)
{
}
} // end finally
return obj;
} // end decodeObject
/* I N N E R C L A S S I N P U T S T R E A M */
/**
* A {@link Base64#InputStream} will read data from another
* {@link java.io.InputStream}, given in the constructor, and encode/decode
* to/from Base64 notation on the fly.
*
* @see Base64
* @see java.io.FilterInputStream
* @since 1.3
*/
public static class InputStream extends java.io.FilterInputStream
{
// private int options; // Options specified
private boolean encode; // Encoding or decoding
private int position; // Current position in the buffer
private byte[] buffer; // Small buffer holding converted data
private int bufferLength; // Length of buffer (3 or 4)
private int numSigBytes; // Number of meaningful bytes in the buffer
private int lineLength;
private boolean breakLines; // Break lines at less than 80 characters
/**
* Constructs a {@link Base64#InputStream} in DECODE mode.
*
* @param in
* the {@link java.io.InputStream} from which to read data.
* @since 1.3
*/
public InputStream(java.io.InputStream pIn)
{
this(pIn, DECODE);
} // end constructor
/**
* Constructs a {@link Base64#InputStream} in either ENCODE or DECODE
* mode.
* <p>
* Valid options:
*
* <pre>
* ENCODE or DECODE: Encode or Decode as data is read.
* DONT_BREAK_LINES: don't break lines at 76 characters
* (only meaningful when encoding)
* <i>Note: Technically, this makes your encoding non-compliant.</i>
* </pre>
* <p>
* Example: <code>new Base64.InputStream( in, Base64.DECODE )</code>
*
*
* @param in
* the {@link java.io.InputStream} from which to read data.
* @param options
* Specified options
* @see Base64#ENCODE
* @see Base64#DECODE
* @see Base64#DONT_BREAK_LINES
* @since 2.0
*/
public InputStream(java.io.InputStream pIn, int options)
{
super(pIn);
// this.options = options;
breakLines = (options & DONT_BREAK_LINES) != DONT_BREAK_LINES;
encode = (options & ENCODE) == ENCODE;
bufferLength = encode ? 4 : 3;
buffer = new byte[bufferLength];
position = -1;
lineLength = 0;
} // end constructor
/**
* Reads enough of the input stream to convert to/from Base64 and
* returns the next byte.
*
* @return next byte
* @since 1.3
*/
@Override
public int read() throws java.io.IOException
{
// Do we need to get data?
if (position < 0)
{
if (encode)
{
byte[] b3 = new byte[3];
int numBinaryBytes = 0;
for (int i = 0; i < 3; i++)
{
try
{
int b = in.read();
// If end of stream, b is -1.
if (b >= 0)
{
b3[i] = (byte) b;
numBinaryBytes++;
} // end if: not end of stream
} // end try: read
catch (java.io.IOException e)
{
// Only a problem if we got no data at all.
if (i == 0)
throw e;
} // end catch
} // end for: each needed input byte
if (numBinaryBytes > 0)
{
encode3to4(b3, 0, numBinaryBytes, buffer, 0);
position = 0;
numSigBytes = 4;
} // end if: got data
else
{
return -1;
} // end else
} // end if: encoding
// Else decoding
else
{
byte[] b4 = new byte[4];
int i = 0;
for (i = 0; i < 4; i++)
{
// Read four "meaningful" bytes:
int b = 0;
do
{
b = in.read();
}
while (b >= 0 && DECODABET[b & 0x7f] <= WHITE_SPACE_ENC);
if (b < 0)
break; // Reads a -1 if end of stream
b4[i] = (byte) b;
} // end for: each needed input byte
if (i == 4)
{
numSigBytes = decode4to3(b4, 0, buffer, 0);
position = 0;
} // end if: got four characters
else if (i == 0)
{
return -1;
} // end else if: also padded correctly
else
{
// Must have broken out from above.
throw new java.io.IOException("Improperly padded Base64 input.");
} // end
} // end else: decode
} // end else: get data
// Got data?
if (position >= 0)
{
// End of relevant data?
if ( /* !encode && */position >= numSigBytes)
return -1;
if (encode && breakLines && lineLength >= MAX_LINE_LENGTH)
{
lineLength = 0;
return '\n';
} // end if
lineLength++; // This isn't important when decoding
// but throwing an extra "if" seems
// just as wasteful.
int b = buffer[position++];
if (position >= bufferLength)
position = -1;
return b & 0xFF; // This is how you "cast" a byte that's
// intended to be unsigned.
// end else
} // end if: position >= 0
// When JDK1.4 is more accepted, use an assertion here.
throw new java.io.IOException("Error in Base64 code reading stream.");
// end else
} // end read
/**
* Calls {@link #read} repeatedly until the end of stream is reached or
* <var>len</var> bytes are read. Returns number of bytes read into
* array or -1 if end of stream is encountered.
*
* @param dest
* array to hold values
* @param off
* offset for array
* @param len
* max number of bytes to read into array
* @return bytes read into array or -1 if end of stream is encountered.
* @since 1.3
*/
@Override
public int read(byte[] dest, int off, int len) throws java.io.IOException
{
int i;
int b;
for (i = 0; i < len; i++)
{
b = read();
// if( b < 0 && i == 0 )
// return -1;
if (b >= 0)
dest[off + i] = (byte) b;
else if (i == 0)
return -1;
else
break; // Out of 'for' loop
} // end for: each byte read
return i;
} // end read
} // end inner class InputStream
/* I N N E R C L A S S O U T P U T S T R E A M */
/**
* A {@link Base64#OutputStream} will write data to another
* {@link java.io.OutputStream}, given in the constructor, and encode/decode
* to/from Base64 notation on the fly.
*
* @see Base64
* @see java.io.FilterOutputStream
* @since 1.3
*/
public static class OutputStream extends java.io.FilterOutputStream
{
// private int options;
private boolean encode;
private int position;
private byte[] buffer;
private int bufferLength;
private int lineLength;
private boolean breakLines;
private byte[] b4; // Scratch used in a few places
private boolean suspendEncoding;
/**
* Constructs a {@link Base64#OutputStream} in ENCODE mode.
*
* @param out
* the {@link java.io.OutputStream} to which data will be
* written.
* @since 1.3
*/
public OutputStream(java.io.OutputStream pOut)
{
this(pOut, ENCODE);
} // end constructor
/**
* Constructs a {@link Base64#OutputStream} in either ENCODE or DECODE
* mode.
* <p>
* Valid options:
*
* <pre>
* ENCODE or DECODE: Encode or Decode as data is read.
* DONT_BREAK_LINES: don't break lines at 76 characters
* (only meaningful when encoding)
* <i>Note: Technically, this makes your encoding non-compliant.</i>
* </pre>
* <p>
* Example: <code>new Base64.OutputStream( out, Base64.ENCODE )</code>
*
* @param out
* the {@link java.io.OutputStream} to which data will be
* written.
* @param options
* Specified options.
* @see Base64#ENCODE
* @see Base64#DECODE
* @see Base64#DONT_BREAK_LINES
* @since 1.3
*/
public OutputStream(java.io.OutputStream pOut, int options)
{
super(pOut);
// this.options = options;
breakLines = (options & DONT_BREAK_LINES) != DONT_BREAK_LINES;
encode = (options & ENCODE) == ENCODE;
bufferLength = encode ? 3 : 4;
buffer = new byte[bufferLength];
position = 0;
lineLength = 0;
suspendEncoding = false;
b4 = new byte[4];
} // end constructor
/**
* Writes the byte to the output stream after converting to/from Base64
* notation. When encoding, bytes are buffered three at a time before
* the output stream actually gets a write() call. When decoding, bytes
* are buffered four at a time.
*
* @param theByte
* the byte to write
* @since 1.3
*/
@Override
public void write(int theByte) throws java.io.IOException
{
// Encoding suspended?
if (suspendEncoding)
{
super.out.write(theByte);
return;
} // end if: supsended
// Encode?
if (encode)
{
buffer[position++] = (byte) theByte;
if (position >= bufferLength) // Enough to encode.
{
out.write(encode3to4(b4, buffer, bufferLength));
lineLength += 4;
if (breakLines && lineLength >= MAX_LINE_LENGTH)
{
out.write(NEW_LINE);
lineLength = 0;
} // end if: end of line
position = 0;
} // end if: enough to output
} // end if: encoding
// Else, Decoding
else
{
// Meaningful Base64 character?
if (DECODABET[theByte & 0x7f] > WHITE_SPACE_ENC)
{
buffer[position++] = (byte) theByte;
if (position >= bufferLength) // Enough to output.
{
int len = Base64.decode4to3(buffer, 0, b4, 0);
out.write(b4, 0, len);
// out.write( Base64.decode4to3( buffer ) );
position = 0;
} // end if: enough to output
} // end if: meaningful base64 character
else if (DECODABET[theByte & 0x7f] != WHITE_SPACE_ENC)
{
throw new java.io.IOException("Invalid character in Base64 data.");
} // end else: not white space either
} // end else: decoding
} // end write
/**
* Calls {@link #write} repeatedly until <var>len</var> bytes are
* written.
*
* @param theBytes
* array from which to read bytes
* @param off
* offset for array
* @param len
* max number of bytes to read into array
* @since 1.3
*/
@Override
public void write(byte[] theBytes, int off, int len) throws java.io.IOException
{
// Encoding suspended?
if (suspendEncoding)
{
super.out.write(theBytes, off, len);
return;
} // end if: supsended
for (int i = 0; i < len; i++)
{
write(theBytes[off + i]);
} // end for: each byte written
} // end write
/**
* Method added by PHIL. [Thanks, PHIL. -Rob] This pads the buffer
* without closing the stream.
*/
public void flushBase64() throws java.io.IOException
{
if (position > 0)
{
if (encode)
{
out.write(encode3to4(b4, buffer, position));
position = 0;
} // end if: encoding
else
{
throw new java.io.IOException("Base64 input not properly padded.");
} // end else: decoding
} // end if: buffer partially full
} // end flush
/**
* Flushes and closes (I think, in the superclass) the stream.
*
* @since 1.3
*/
@Override
public void close() throws java.io.IOException
{
// 1. Ensure that pending characters are written
flushBase64();
// 2. Actually close the stream
// Base class both flushes and closes.
super.close();
buffer = null;
out = null;
} // end close
/**
* Suspends encoding of the stream. May be helpful if you need to embed
* a piece of base640-encoded data in a stream.
*
* @since 1.5.1
*/
public void suspendEncoding() throws java.io.IOException
{
flushBase64();
suspendEncoding = true;
} // end suspendEncoding
/**
* Resumes encoding of the stream. May be helpful if you need to embed a
* piece of base640-encoded data in a stream.
*
* @since 1.5.1
*/
public void resumeEncoding()
{
suspendEncoding = false;
} // end resumeEncoding
} // end inner class OutputStream
} // end class Base64
кажется как то тут можно добавить русс язык....
Добавлено через 8754 часов 1 минуту
все без вас я разобрался...
|
