Помогите плз :)

[eruru]

всем доброго времени суток.
Прошу помочь в решении небольшой проблемки.
Поставил себе сборку L2J_Server_Epilogue_Rev_7133
вроде бы все норм, создаю себе акк, запускаю клиент , ввожу данные,
появляется окно выбора сервера, при нажатии ок ничего не происходит.
С чем может быть связанно ? чтото с Логин Сервером?

[Devilop]

не указан какой клиент
нет логов из ЛС/ГС
нет настроек ЛС/ГС

[eruru]

клиент Epilogue

loginserver.properties

#
---------------------------------------------------------------------------
# Login Server Settings
# ---------------------------------------------------------------------------
# This is the server configuration file. Here you can set up the connection information for your server.
# This was written with the assumption that you are behind a router.
# Dumbed Down Definitions...
# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.
# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).
# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.
# ---------------------------------------------------------------------------
# Networking
# ---------------------------------------------------------------------------
# This is transmitted to the clients connecting from an external network, so it has to be a public IP or resolvable hostname
# Common settings...
# 127.0.0.1 - If you are playing alone on a test server
# 192.168.x.x - This is if you are on a 192.168.x.x type network (behind a standard consumer router) and want other computers from JUST the internal network to be able to connect
# x.x.x.x - WAN IP obtained from http://www.whatismyip.com/. This is if you want people outside your internal network to be able to connect to your server.
# ---------------------------------------------------------------------------
# Default: 127.0.0.1
ExternalHostname = 10.128.36.58

# ---------------------------------------------------------------------------
# This is transmitted to the client from the same network, so it has to be a local IP or resolvable hostname.
# This can be the internal IP such as 127.0.0.1 or the computer's IP such as 192.168.x.x.
# ---------------------------------------------------------------------------
# Default: 127.0.0.1
InternalHostname = 127.0.0.1

# ---------------------------------------------------------------------------
# If you are behind a router which using its own local IP for Port Forwarding then set this to the routers
# local IP if you want people outside your internal network to be able to connect to your server.
# ---------------------------------------------------------------------------
# RouterHostname =

# Bind ip of the LoginServer, use * to bind on all available IPs
# Default: *
LoginserverHostname = *

# Default: 2106
LoginserverPort = 2106

# The address on which login will listen for GameServers, use * to bind on all available IPs
# Default: *
LoginHostname = *

# The port on which login will listen for GameServers
# Default: 9014
LoginPort = 9014

# The delay in minutes after which the login updates the gameservers IP's (usefull when their ip is dynamic)
# Default: 15
IpUpdateTime = 15


# ---------------------------------------------------------------------------
# Security
# ---------------------------------------------------------------------------
# Default: True
LogLoginController = True

# How many times you can provide an invalid account/pass before the IP gets banned.
# Default: 10
LoginTryBeforeBan = 10

# Time you won't be able to login back again after LoginTryBeforeBan tries to login.
# Default: 600 (10 minutes)
LoginBlockAfterBan = 600

# If set to True any GameServer can register on your login's free slots
# Default: False
AcceptNewGameServer = False

# Enforce GameGuard authorization from client?
# If True, login server will kick client if the client bypassed GameGuard authentication.
# Default: False
ForceGGAuth = False

# Flood Protection. All values are in MILISECONDS.
# Default: True
EnableFloodProtection = True

# Default: 15
FastConnectionLimit = 15

# Default: 700
NormalConnectionTime = 700

# Default: 350
FastConnectionTime = 350

# Default: 50
MaxConnectionPerIP = 50


# ---------------------------------------------------------------------------
# Database
# ---------------------------------------------------------------------------
# Specify the appropriate driver and url for the database you're using.
# Examples:
# Driver = com.mysql.jdbc.Driver (default)
# Driver = org.hsqldb.jdbcDriver
# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver
Driver = com.mysql.jdbc.Driver
# Database URL
# URL = jdbc:mysql://localhost/l2jdb (default)
# URL = jdbc:hsqldb:hsql://localhost/l2jdb
# URL = jdbcqlserver://localhost/database = l2jdb/user = sa/password =
URL = jdbc:mysql://localhost/l2jdb
# Database user info (default is "root" but it's not recommended)
Login = root
# Database connection password
Password = 1seedead

# Default: 10
MaximumDbConnections = 10

# Default: 0
MaximumDbIdleTime = 0


# ---------------------------------------------------------------------------
# Misc.
# ---------------------------------------------------------------------------
# If False, the license (after the login) will not be shown.
# Default: True
ShowLicence = True

# Default: True
AutoCreateAccounts = True


# ---------------------------------------------------------------------------
# Developer Settings
# ---------------------------------------------------------------------------
# Default: False
Debug = False

# Default: False
Assert = False

# Default: False
Developer = False

server.properties

# ---------------------------------------------------------------------------
# Game Server Settings
# ---------------------------------------------------------------------------
# This is the server configuration file. Here you can set up the connection information for your server.
# This was written with the assumption that you are behind a router.
# Dumbed Down Definitions...
# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.
# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).
# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.
# ---------------------------------------------------------------------------
# Networking
# ---------------------------------------------------------------------------
# This is transmitted to the clients connecting from an external network, so it has to be a public IP or resolvable hostname
# Common settings...
# 127.0.0.1 - If you are playing alone on a test server
# 192.168.x.x - This is if you are on a 192.168.x.x type network (behind a standard consumer router) and want other computers from JUST the internal network to be able to connect
# x.x.x.x - WAN IP obtained from http://www.whatismyip.com/. This is if you want people outside your internal network to be able to connect to your server.
# If this IP is resolvable by the Login Server, just leave *.
# ---------------------------------------------------------------------------
# Default: *
ExternalHostname = *

# ---------------------------------------------------------------------------
# This is transmitted to the client from the same network, so it has to be a local IP or resolvable hostname.
# This can be the internal IP such as 127.0.0.1 or the computer's IP such as 192.168.x.x.
# If this IP is resolvable by the Login Server, just leave *.
# ---------------------------------------------------------------------------
# Default: *
InternalHostname = 10.128.36.58

# Where's the Login server this gameserver should connect to
# Default: 127.0.0.1
LoginHost = 10.128.36.58

# TCP port the login server listen to for gameserver connection requests
# Default: 9014
LoginPort = 9014

# Default: *
GameserverHostname = *

# Default: 7777
GameserverPort = 7777


# ---------------------------------------------------------------------------
# Database
# ---------------------------------------------------------------------------
# Specify the appropriate driver and url for the database you're using.
# Examples:
# Driver = com.mysql.jdbc.Driver (default)
# Driver = org.hsqldb.jdbcDriver
# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver
Driver = com.mysql.jdbc.Driver
# Database URL
# URL = jdbc:mysql://localhost/l2jdb (default)
# URL = jdbc:hsqldb:hsql://localhost/l2jdb
# URL = jdbcqlserver://localhost/database = l2jdb/user = sa/password =
URL = jdbc:mysql://localhost/l2jdb
# Database user info (default is "root" but it's not recommended)
Login = root
# Database connection password
Password = 1seedead

# Default: 100
MaximumDbConnections = 100

# Default: 0
MaximumDbIdleTime = 0

# ---------------------------------------------------------------------------
# Misc Server Settings
# ---------------------------------------------------------------------------
# This is the server ID that the Game Server will request.
# Example: 1 = Bartz
# Default: 1
RequestServerID = 1

# True = The Login Server will give an other ID to the server if the requested ID is already reserved.
# Default: True
AcceptAlternateID = True

# Datapack root directory.
# Defaults to current directory from which the server is started unless the below line is uncommented.
#DatapackRoot = D:/Program Files/Server/L2J_DataPack

# Define how many players are allowed to play simultaneously on your server.
# Default: 100
MaximumOnlineUsers = 100

# Minimum and maximum protocol revision that server allow to connect.
# Warning: You must make sure that the minimum revision is always less than or equal to the maximum revision.
# WARNING: <u><b><font color="red">Changing the protocol revision may result in incompatible communication and many errors in game!</font></b></u>
# Default: 146
MinProtocolRevision = 1

# Minimum and maximum protocol revision that server allow to connect.
# Warning: You must make sure that the minimum revision is always less than or equal to the maximum revision.
# WARNING: <u><b><font color="red">Changing the protocol revision may result in incompatible communication and many errors in game!</font></b></u>
# Default: 146
MaxProtocolRevision = 999


# ---------------------------------------------------------------------------
# Misc Player Settings
# ---------------------------------------------------------------------------

# Character name template.
# Examples:
# CnameTemplate = [A-Z][a-z]{3,3}[A-Za-z0-9]*
# The above setting will allow names with first capital letter, next three small letters,
# and any letter (case insensitive) or number, like OmfgWTF1
# CnameTemplate = [A-Z][a-z]*
# The above setting will allow names only of letters with first one capital, like Omfgwtf
# Default .* (allows any symbol)
CnameTemplate = .*

# This setting restricts names players can give to their pets.
# See CnameTemplate for details
PetNameTemplate = .*

# Maximum number of characters per account.
# Default: 7 (client limit)
CharMaxNumber = 7

сервер пытаюсь настроить чтобы работал через локалку
помогите пжлсто

[Devilop]

ну и накуралесил с настройками ты
во первых про ГС
InternalHostname = 10.128.36.58
замени обратно на *
во вторых в ЛС поменяй местами цифры в следующих строчках
ExternalHostname = 10.128.36.58

InternalHostname = 127.0.0.1
а после запускай ЛС и ГС и смотри чтобы конект был

[eruru]

хм, исправил.
посмотри на скрин если не трудно, так себя должны вести лог и гейм сервы?

скрин

п.с просто проблема осталась , дальше выбора сервера непускает ...

[Devilop]

странно почему ЛС присудил твоему серверу ID9(Teon) хотя должен был присудить ID 1(Bartz)

[eruru]

поставил в ручную 9
9 ведь = Теон.

я прост непойму почему на скрине с ЛС ИП и локальный и внешний *
разве так должно быть?

[Devilop]

* означает пробивку по всем адресам для конекта
а что касается ID ВЕРНИ НАЗАТ КАК И БЫЛ

[eruru]

ID вернул на 1
может быть дело в л2ини ?

l2ini

в файл вписал локальный ИП

[Devilop]

попробуй удалить строчку ;ServerAddr=10.128.36.58