Не заходит у друзей на мой сервер

[KinlyDog]

Создал сервер настроил , вписал все IP , Подключаюсь к своему серверу , всё работает , кидаю папку систем друзьям , оня вводят логин проль , принять , и зависают на выборе сервера (

[Credo]

конфиги выложи... и файл l2.ini

[Дух системы]

KinlyDog, друзья из вне или внутри локалки?

[KinlyDog]

Сообщение от Дух системы

KinlyDog, друзья из вне или внутри локалки?

внутри локалки

Добавлено через 37 секунд

Сообщение от Дух системы

KinlyDog, друзья из вне или внутри локалки?

Сообщение от Credo

конфиги выложи... и файл l2.ini

выложу чють поже

[Дух системы]

KinlyDog, проверяй не лочит ли брандмауэр используемые порты, а на всякий доабвь в исключения все которые используются , не ставь сервера слушать 127.0.0.1, лучше какой нибудь физический интерфейс.

по сути у тебя не пускает людей на гейм, тк он для них закрыт

сервера нормально друг друга находят?

[UFODriverr]

KinlyDog, Самое первое как все писали уже проверь свой л2 ини точнее ихний. И проверь настройки своего сервера. Еще лучше выложи пропертис геймсервера и логин сервера. Если лень выкладывать тогды проверь просо все ли правильно написал либо кинь сюда код файлов этих (gameserver/loginserver propertis)

[KinlyDog]

Сообщение от UFODriverr

KinlyDog, Самое первое как все писали уже проверь свой л2 ини точнее ихний. И проверь настройки своего сервера. Еще лучше выложи пропертис геймсервера и логин сервера. Если лень выкладывать тогды проверь просо все ли правильно написал либо кинь сюда код файлов этих (gameserver/loginserver propertis)

# ---------------------------------------------------------------------------
# Login Server Settings
# ---------------------------------------------------------------------------
# This is the server configuration file. Here you can set up the connection information for your server.
# This was written with the assumption that you are behind a router.
# Dumbed Down Definitions...
# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.
# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).
# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.
# ---------------------------------------------------------------------------
# Networking
# ---------------------------------------------------------------------------
# This is transmitted to the clients connecting from an external network, so it has to be a public IP or resolvable hostname
# Common settings...
# 127.0.0.1 - If you are playing alone on a test server
# 192.168.x.x - This is if you are on a 192.168.x.x type network (behind a standard consumer router) and want other computers from JUST the internal network to be able to connect
# x.x.x.x - WAN IP obtained from http://www.whatismyip.com/. This is if you want people outside your internal network to be able to connect to your server.
# ---------------------------------------------------------------------------
# Default: 127.0.0.1
ExternalHostname = 192.168.1.12


# ---------------------------------------------------------------------------
# This is transmitted to the client from the same network, so it has to be a local IP or resolvable hostname.
# This can be the internal IP such as 127.0.0.1 or the computer's IP such as 192.168.x.x.
# ---------------------------------------------------------------------------
# Default: 127.0.0.1
InternalHostname = 127.0.0.1

# ---------------------------------------------------------------------------
# If you are behind a router which using its own local IP for Port Forwarding then set this to the routers
# local IP if you want people outside your internal network to be able to connect to your server.
# ---------------------------------------------------------------------------
# RouterHostname = 

# Bind ip of the LoginServer, use * to bind on all available IPs
# Default: *
LoginserverHostname = *

# Default: 2106
LoginserverPort = 2106

# The address on which login will listen for GameServers, use * to bind on all available IPs
# Default: *
LoginHostname = *

# The port on which login will listen for GameServers
# Default: 9014
LoginPort = 9014

# The delay in minutes after which the login updates the gameservers IP's (usefull when their ip is dynamic)
# Default: 15
IpUpdateTime = 15


# ---------------------------------------------------------------------------
# Security
# ---------------------------------------------------------------------------
# Default: True
LogLoginController = True

# How many times you can provide an invalid account/pass before the IP gets banned.
# Default: 10
LoginTryBeforeBan = 10

# Time you won't be able to login back again after LoginTryBeforeBan tries to login.
# Default: 600 (10 minutes)
LoginBlockAfterBan = 600

# If set to True any GameServer can register on your login's free slots
# Default: False
AcceptNewGameServer = False

# Enforce GameGuard authorization from client?
# If True, login server will kick client if the client bypassed GameGuard authentication.
# Default: False
ForceGGAuth = False

# Flood Protection. All values are in MILISECONDS.
# Default: True
EnableFloodProtection = True

# Default: 15
FastConnectionLimit = 15

# Default: 700
NormalConnectionTime = 700

# Default: 350
FastConnectionTime = 350

# Default: 50
MaxConnectionPerIP = 50


# ---------------------------------------------------------------------------
# Database
# ---------------------------------------------------------------------------
# Specify the appropriate driver and url for the database you're using.
# Examples:
# Driver = com.mysql.jdbc.Driver (default)
# Driver = org.hsqldb.jdbcDriver
# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver
Driver = com.mysql.jdbc.Driver
# Database URL
# URL = jdbc:mysql://localhost/l2jdb (default)
# URL = jdbc:hsqldb:hsql://localhost/l2jdb
# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password = 
URL = jdbc:mysql://localhost/l2jdb
# Database user info (default is "root" but it's not recommended)
Login = root
# Database connection password
Password = 111

# Default: 10
MaximumDbConnections = 10

# Default: 0
MaximumDbIdleTime = 0


# ---------------------------------------------------------------------------
# Misc.
# ---------------------------------------------------------------------------
# If False, the license (after the login) will not be shown.
# Default: True
ShowLicence = True

# Default: True
AutoCreateAccounts = True


# ---------------------------------------------------------------------------
# Developer Settings
# ---------------------------------------------------------------------------
# Default: False
Debug = False

# Default: False
Assert = False

# Default: False
Developer = False

# ---------------------------------------------------------------------------
# Game Server Settings
# ---------------------------------------------------------------------------
# This is the server configuration file. Here you can set up the connection information for your server.
# This was written with the assumption that you are behind a router.
# Dumbed Down Definitions...
# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.
# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).
# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.
# ---------------------------------------------------------------------------
# Networking
# ---------------------------------------------------------------------------
# This is transmitted to the clients connecting from an external network, so it has to be a public IP or resolvable hostname
# Common settings...
# 127.0.0.1 - If you are playing alone on a test server
# 192.168.x.x - This is if you are on a 192.168.x.x type network (behind a standard consumer router) and want other computers from JUST the internal network to be able to connect
# x.x.x.x - WAN IP obtained from http://www.whatismyip.com/. This is if you want people outside your internal network to be able to connect to your server.
# If this IP is resolvable by the Login Server, just leave *.
# ---------------------------------------------------------------------------
# Default: *
ExternalHostname = 192.168.1.12

# ---------------------------------------------------------------------------
# This is transmitted to the client from the same network, so it has to be a local IP or resolvable hostname.
# This can be the internal IP such as 127.0.0.1 or the computer's IP such as 192.168.x.x.
# If this IP is resolvable by the Login Server, just leave *.
# ---------------------------------------------------------------------------
# Default: *
InternalHostname = *

# Where's the Login server this gameserver should connect to
# Default: 127.0.0.1
LoginHost = 127.0.0.1

# TCP port the login server listen to for gameserver connection requests
# Default: 9014
LoginPort = 9014

# Default: *
GameserverHostname = *

# Default: 7777
GameserverPort = 7777


# ---------------------------------------------------------------------------
# Database
# ---------------------------------------------------------------------------
# Specify the appropriate driver and url for the database you're using.
# Examples:
# Driver = com.mysql.jdbc.Driver (default)
# Driver = org.hsqldb.jdbcDriver
# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver
Driver = com.mysql.jdbc.Driver
# Database URL
# URL = jdbc:mysql://localhost/l2jdb (default)
# URL = jdbc:hsqldb:hsql://localhost/l2jdb
# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password = 
URL = jdbc:mysql://localhost/l2jdb
# Database user info (default is "root" but it's not recommended)
Login = root
# Database connection password
Password = 111

# Default: 100
MaximumDbConnections = 100

# Default: 0
MaximumDbIdleTime = 0

# ---------------------------------------------------------------------------
# Misc Server Settings
# ---------------------------------------------------------------------------
# This is the server ID that the Game Server will request.
# Example: 1 = Bartz
# Default: 1
RequestServerID = 1

# True = The Login Server will give an other ID to the server if the requested ID is already reserved.
# Default: True
AcceptAlternateID = True

# Datapack root directory.
# Defaults to current directory from which the server is started unless the below line is uncommented.
#DatapackRoot = C:/Work/tmp/DataPack

# Define how many players are allowed to play simultaneously on your server.
# Default: 100
MaximumOnlineUsers = 100

# Minimum and maximum protocol revision that server allow to connect.
# Warning: You must make sure that the minimum revision is always less than or equal to the maximum revision.
# WARNING: <u><b><font color="red">Changing the protocol revision may result in incompatible communication and many errors in game!</font></b></u>
# Default: 146
MinProtocolRevision = 146

# Minimum and maximum protocol revision that server allow to connect.
# Warning: You must make sure that the minimum revision is always less than or equal to the maximum revision.
# WARNING: <u><b><font color="red">Changing the protocol revision may result in incompatible communication and many errors in game!</font></b></u>
# Default: 146
MaxProtocolRevision = 146


# ---------------------------------------------------------------------------
# Misc Player Settings
# ---------------------------------------------------------------------------

# Character name template.
# Examples:
# CnameTemplate = [A-Z][a-z]{3,3}[A-Za-z0-9]*
# The above setting will allow names with first capital letter, next three small letters,
# and any letter (case insensitive) or number, like OmfgWTF1
# CnameTemplate = [A-Z][a-z]*
# The above setting will allow names only of letters with first one capital, like Omfgwtf
# Default .* (allows any symbol)
CnameTemplate = .*

# This setting restricts names players can give to their pets.
# See CnameTemplate for details
PetNameTemplate = .*

# Maximum number of characters per account.
# Default: 7 (client limit)
CharMaxNumber = 7

а папку систем качал с этого сайта раскодировал л2 ини и поменял только ServerAddr=192.168.1.12 закодировал обратно и кинул в папку систем , потом кинул паппку систем друзьям...

[UFODriverr]

KinlyDog, Ты не туда списал свой ип. Ип локалки впиши в

InternalHostname = 127.0.0.1

а не в

ExternalHostname = 192.168.1.12

Должно быть так.

# ---------------------------------------------------------------------------
# Login Server Settings
# ---------------------------------------------------------------------------
# This is the server configuration file. Here you can set up the connection information for your server.
# This was written with the assumption that you are behind a router.
# Dumbed Down Definitions...
# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.
# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).
# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.
# ---------------------------------------------------------------------------
# Networking
# ---------------------------------------------------------------------------
# This is transmitted to the clients connecting from an external network, so it has to be a public IP or resolvable hostname
# Common settings...
# 127.0.0.1 - If you are playing alone on a test server
# 192.168.x.x - This is if you are on a 192.168.x.x type network (behind a standard consumer router) and want other computers from JUST the internal network to be able to connect
# x.x.x.x - WAN IP obtained from http://www.whatismyip.com/. This is if you want people outside your internal network to be able to connect to your server.
# ---------------------------------------------------------------------------
# Default: 127.0.0.1
ExternalHostname = 192.168.1.12


# ---------------------------------------------------------------------------
# This is transmitted to the client from the same network, so it has to be a local IP or resolvable hostname.
# This can be the internal IP such as 127.0.0.1 or the computer's IP such as 192.168.x.x.
# ---------------------------------------------------------------------------
# Default: 127.0.0.1
InternalHostname = 192.168.1.12

# ---------------------------------------------------------------------------
# If you are behind a router which using its own local IP for Port Forwarding then set this to the routers
# local IP if you want people outside your internal network to be able to connect to your server.
# ---------------------------------------------------------------------------
# RouterHostname = 

# Bind ip of the LoginServer, use * to bind on all available IPs
# Default: *
LoginserverHostname = *

# Default: 2106
LoginserverPort = 2106

# The address on which login will listen for GameServers, use * to bind on all available IPs
# Default: *
LoginHostname = *

# The port on which login will listen for GameServers
# Default: 9014
LoginPort = 9014

# The delay in minutes after which the login updates the gameservers IP's (usefull when their ip is dynamic)
# Default: 15
IpUpdateTime = 15


# ---------------------------------------------------------------------------
# Security
# ---------------------------------------------------------------------------
# Default: True
LogLoginController = True

# How many times you can provide an invalid account/pass before the IP gets banned.
# Default: 10
LoginTryBeforeBan = 10

# Time you won't be able to login back again after LoginTryBeforeBan tries to login.
# Default: 600 (10 minutes)
LoginBlockAfterBan = 600

# If set to True any GameServer can register on your login's free slots
# Default: False
AcceptNewGameServer = False

# Enforce GameGuard authorization from client?
# If True, login server will kick client if the client bypassed GameGuard authentication.
# Default: False
ForceGGAuth = False

# Flood Protection. All values are in MILISECONDS.
# Default: True
EnableFloodProtection = True

# Default: 15
FastConnectionLimit = 15

# Default: 700
NormalConnectionTime = 700

# Default: 350
FastConnectionTime = 350

# Default: 50
MaxConnectionPerIP = 50


# ---------------------------------------------------------------------------
# Database
# ---------------------------------------------------------------------------
# Specify the appropriate driver and url for the database you're using.
# Examples:
# Driver = com.mysql.jdbc.Driver (default)
# Driver = org.hsqldb.jdbcDriver
# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver
Driver = com.mysql.jdbc.Driver
# Database URL
# URL = jdbc:mysql://localhost/l2jdb (default)
# URL = jdbc:hsqldb:hsql://localhost/l2jdb
# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password = 
URL = jdbc:mysql://localhost/l2jdb
# Database user info (default is "root" but it's not recommended)
Login = root
# Database connection password
Password = 111

# Default: 10
MaximumDbConnections = 10

# Default: 0
MaximumDbIdleTime = 0


# ---------------------------------------------------------------------------
# Misc.
# ---------------------------------------------------------------------------
# If False, the license (after the login) will not be shown.
# Default: True
ShowLicence = True

# Default: True
AutoCreateAccounts = True


# ---------------------------------------------------------------------------
# Developer Settings
# ---------------------------------------------------------------------------
# Default: False
Debug = False

# Default: False
Assert = False

# Default: False
Developer = False

# ---------------------------------------------------------------------------
# Game Server Settings
# ---------------------------------------------------------------------------
# This is the server configuration file. Here you can set up the connection information for your server.
# This was written with the assumption that you are behind a router.
# Dumbed Down Definitions...
# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.
# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).
# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.
# ---------------------------------------------------------------------------
# Networking
# ---------------------------------------------------------------------------
# This is transmitted to the clients connecting from an external network, so it has to be a public IP or resolvable hostname
# Common settings...
# 127.0.0.1 - If you are playing alone on a test server
# 192.168.x.x - This is if you are on a 192.168.x.x type network (behind a standard consumer router) and want other computers from JUST the internal network to be able to connect
# x.x.x.x - WAN IP obtained from http://www.whatismyip.com/. This is if you want people outside your internal network to be able to connect to your server.
# If this IP is resolvable by the Login Server, just leave *.
# ---------------------------------------------------------------------------
# Default: *
ExternalHostname = 192.168.1.12

# ---------------------------------------------------------------------------
# This is transmitted to the client from the same network, so it has to be a local IP or resolvable hostname.
# This can be the internal IP such as 127.0.0.1 or the computer's IP such as 192.168.x.x.
# If this IP is resolvable by the Login Server, just leave *.
# ---------------------------------------------------------------------------
# Default: *
InternalHostname = 192.168.1.12

# Where's the Login server this gameserver should connect to
# Default: 127.0.0.1
LoginHost = 127.0.0.1

# TCP port the login server listen to for gameserver connection requests
# Default: 9014
LoginPort = 9014

# Default: *
GameserverHostname = *

# Default: 7777
GameserverPort = 7777


# ---------------------------------------------------------------------------
# Database
# ---------------------------------------------------------------------------
# Specify the appropriate driver and url for the database you're using.
# Examples:
# Driver = com.mysql.jdbc.Driver (default)
# Driver = org.hsqldb.jdbcDriver
# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver
Driver = com.mysql.jdbc.Driver
# Database URL
# URL = jdbc:mysql://localhost/l2jdb (default)
# URL = jdbc:hsqldb:hsql://localhost/l2jdb
# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password = 
URL = jdbc:mysql://localhost/l2jdb
# Database user info (default is "root" but it's not recommended)
Login = root
# Database connection password
Password = 111

# Default: 100
MaximumDbConnections = 100

# Default: 0
MaximumDbIdleTime = 0

# ---------------------------------------------------------------------------
# Misc Server Settings
# ---------------------------------------------------------------------------
# This is the server ID that the Game Server will request.
# Example: 1 = Bartz
# Default: 1
RequestServerID = 1

# True = The Login Server will give an other ID to the server if the requested ID is already reserved.
# Default: True
AcceptAlternateID = True

# Datapack root directory.
# Defaults to current directory from which the server is started unless the below line is uncommented.
#DatapackRoot = C:/Work/tmp/DataPack

# Define how many players are allowed to play simultaneously on your server.
# Default: 100
MaximumOnlineUsers = 100

# Minimum and maximum protocol revision that server allow to connect.
# Warning: You must make sure that the minimum revision is always less than or equal to the maximum revision.
# WARNING: <u><b><font color="red">Changing the protocol revision may result in incompatible communication and many errors in game!</font></b></u>
# Default: 146
MinProtocolRevision = 146

# Minimum and maximum protocol revision that server allow to connect.
# Warning: You must make sure that the minimum revision is always less than or equal to the maximum revision.
# WARNING: <u><b><font color="red">Changing the protocol revision may result in incompatible communication and many errors in game!</font></b></u>
# Default: 146
MaxProtocolRevision = 146


# ---------------------------------------------------------------------------
# Misc Player Settings
# ---------------------------------------------------------------------------

# Character name template.
# Examples:
# CnameTemplate = [A-Z][a-z]{3,3}[A-Za-z0-9]*
# The above setting will allow names with first capital letter, next three small letters,
# and any letter (case insensitive) or number, like OmfgWTF1
# CnameTemplate = [A-Z][a-z]*
# The above setting will allow names only of letters with first one capital, like Omfgwtf
# Default .* (allows any symbol)
CnameTemplate = .*

# This setting restricts names players can give to their pets.
# See CnameTemplate for details
PetNameTemplate = .*

# Maximum number of characters per account.
# Default: 7 (client limit)
CharMaxNumber = 7

[KinlyDog]

Сообщение от UFODriverr

KinlyDog, Ты не туда списал свой ип. Ип локалки впиши в

InternalHostname = 127.0.0.1

а не в

ExternalHostname = 192.168.1.12

Должно быть так.

# ---------------------------------------------------------------------------
# Login Server Settings
# ---------------------------------------------------------------------------
# This is the server configuration file. Here you can set up the connection information for your server.
# This was written with the assumption that you are behind a router.
# Dumbed Down Definitions...
# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.
# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).
# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.
# ---------------------------------------------------------------------------
# Networking
# ---------------------------------------------------------------------------
# This is transmitted to the clients connecting from an external network, so it has to be a public IP or resolvable hostname
# Common settings...
# 127.0.0.1 - If you are playing alone on a test server
# 192.168.x.x - This is if you are on a 192.168.x.x type network (behind a standard consumer router) and want other computers from JUST the internal network to be able to connect
# x.x.x.x - WAN IP obtained from http://www.whatismyip.com/. This is if you want people outside your internal network to be able to connect to your server.
# ---------------------------------------------------------------------------
# Default: 127.0.0.1
ExternalHostname = 192.168.1.12


# ---------------------------------------------------------------------------
# This is transmitted to the client from the same network, so it has to be a local IP or resolvable hostname.
# This can be the internal IP such as 127.0.0.1 or the computer's IP such as 192.168.x.x.
# ---------------------------------------------------------------------------
# Default: 127.0.0.1
InternalHostname = 192.168.1.12

# ---------------------------------------------------------------------------
# If you are behind a router which using its own local IP for Port Forwarding then set this to the routers
# local IP if you want people outside your internal network to be able to connect to your server.
# ---------------------------------------------------------------------------
# RouterHostname = 

# Bind ip of the LoginServer, use * to bind on all available IPs
# Default: *
LoginserverHostname = *

# Default: 2106
LoginserverPort = 2106

# The address on which login will listen for GameServers, use * to bind on all available IPs
# Default: *
LoginHostname = *

# The port on which login will listen for GameServers
# Default: 9014
LoginPort = 9014

# The delay in minutes after which the login updates the gameservers IP's (usefull when their ip is dynamic)
# Default: 15
IpUpdateTime = 15


# ---------------------------------------------------------------------------
# Security
# ---------------------------------------------------------------------------
# Default: True
LogLoginController = True

# How many times you can provide an invalid account/pass before the IP gets banned.
# Default: 10
LoginTryBeforeBan = 10

# Time you won't be able to login back again after LoginTryBeforeBan tries to login.
# Default: 600 (10 minutes)
LoginBlockAfterBan = 600

# If set to True any GameServer can register on your login's free slots
# Default: False
AcceptNewGameServer = False

# Enforce GameGuard authorization from client?
# If True, login server will kick client if the client bypassed GameGuard authentication.
# Default: False
ForceGGAuth = False

# Flood Protection. All values are in MILISECONDS.
# Default: True
EnableFloodProtection = True

# Default: 15
FastConnectionLimit = 15

# Default: 700
NormalConnectionTime = 700

# Default: 350
FastConnectionTime = 350

# Default: 50
MaxConnectionPerIP = 50


# ---------------------------------------------------------------------------
# Database
# ---------------------------------------------------------------------------
# Specify the appropriate driver and url for the database you're using.
# Examples:
# Driver = com.mysql.jdbc.Driver (default)
# Driver = org.hsqldb.jdbcDriver
# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver
Driver = com.mysql.jdbc.Driver
# Database URL
# URL = jdbc:mysql://localhost/l2jdb (default)
# URL = jdbc:hsqldb:hsql://localhost/l2jdb
# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password = 
URL = jdbc:mysql://localhost/l2jdb
# Database user info (default is "root" but it's not recommended)
Login = root
# Database connection password
Password = 111

# Default: 10
MaximumDbConnections = 10

# Default: 0
MaximumDbIdleTime = 0


# ---------------------------------------------------------------------------
# Misc.
# ---------------------------------------------------------------------------
# If False, the license (after the login) will not be shown.
# Default: True
ShowLicence = True

# Default: True
AutoCreateAccounts = True


# ---------------------------------------------------------------------------
# Developer Settings
# ---------------------------------------------------------------------------
# Default: False
Debug = False

# Default: False
Assert = False

# Default: False
Developer = False

# ---------------------------------------------------------------------------
# Game Server Settings
# ---------------------------------------------------------------------------
# This is the server configuration file. Here you can set up the connection information for your server.
# This was written with the assumption that you are behind a router.
# Dumbed Down Definitions...
# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.
# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).
# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.
# ---------------------------------------------------------------------------
# Networking
# ---------------------------------------------------------------------------
# This is transmitted to the clients connecting from an external network, so it has to be a public IP or resolvable hostname
# Common settings...
# 127.0.0.1 - If you are playing alone on a test server
# 192.168.x.x - This is if you are on a 192.168.x.x type network (behind a standard consumer router) and want other computers from JUST the internal network to be able to connect
# x.x.x.x - WAN IP obtained from http://www.whatismyip.com/. This is if you want people outside your internal network to be able to connect to your server.
# If this IP is resolvable by the Login Server, just leave *.
# ---------------------------------------------------------------------------
# Default: *
ExternalHostname = 192.168.1.12

# ---------------------------------------------------------------------------
# This is transmitted to the client from the same network, so it has to be a local IP or resolvable hostname.
# This can be the internal IP such as 127.0.0.1 or the computer's IP such as 192.168.x.x.
# If this IP is resolvable by the Login Server, just leave *.
# ---------------------------------------------------------------------------
# Default: *
InternalHostname = 192.168.1.12

# Where's the Login server this gameserver should connect to
# Default: 127.0.0.1
LoginHost = 127.0.0.1

# TCP port the login server listen to for gameserver connection requests
# Default: 9014
LoginPort = 9014

# Default: *
GameserverHostname = *

# Default: 7777
GameserverPort = 7777


# ---------------------------------------------------------------------------
# Database
# ---------------------------------------------------------------------------
# Specify the appropriate driver and url for the database you're using.
# Examples:
# Driver = com.mysql.jdbc.Driver (default)
# Driver = org.hsqldb.jdbcDriver
# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver
Driver = com.mysql.jdbc.Driver
# Database URL
# URL = jdbc:mysql://localhost/l2jdb (default)
# URL = jdbc:hsqldb:hsql://localhost/l2jdb
# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password = 
URL = jdbc:mysql://localhost/l2jdb
# Database user info (default is "root" but it's not recommended)
Login = root
# Database connection password
Password = 111

# Default: 100
MaximumDbConnections = 100

# Default: 0
MaximumDbIdleTime = 0

# ---------------------------------------------------------------------------
# Misc Server Settings
# ---------------------------------------------------------------------------
# This is the server ID that the Game Server will request.
# Example: 1 = Bartz
# Default: 1
RequestServerID = 1

# True = The Login Server will give an other ID to the server if the requested ID is already reserved.
# Default: True
AcceptAlternateID = True

# Datapack root directory.
# Defaults to current directory from which the server is started unless the below line is uncommented.
#DatapackRoot = C:/Work/tmp/DataPack

# Define how many players are allowed to play simultaneously on your server.
# Default: 100
MaximumOnlineUsers = 100

# Minimum and maximum protocol revision that server allow to connect.
# Warning: You must make sure that the minimum revision is always less than or equal to the maximum revision.
# WARNING: <u><b><font color="red">Changing the protocol revision may result in incompatible communication and many errors in game!</font></b></u>
# Default: 146
MinProtocolRevision = 146

# Minimum and maximum protocol revision that server allow to connect.
# Warning: You must make sure that the minimum revision is always less than or equal to the maximum revision.
# WARNING: <u><b><font color="red">Changing the protocol revision may result in incompatible communication and many errors in game!</font></b></u>
# Default: 146
MaxProtocolRevision = 146


# ---------------------------------------------------------------------------
# Misc Player Settings
# ---------------------------------------------------------------------------

# Character name template.
# Examples:
# CnameTemplate = [A-Z][a-z]{3,3}[A-Za-z0-9]*
# The above setting will allow names with first capital letter, next three small letters,
# and any letter (case insensitive) or number, like OmfgWTF1
# CnameTemplate = [A-Z][a-z]*
# The above setting will allow names only of letters with first one capital, like Omfgwtf
# Default .* (allows any symbol)
CnameTemplate = .*

# This setting restricts names players can give to their pets.
# See CnameTemplate for details
PetNameTemplate = .*

# Maximum number of characters per account.
# Default: 7 (client limit)
CharMaxNumber = 7

Свой IP надо и в интернал и в икстернал хостнейм писать?

[UFODriverr]

KinlyDog, Нет надо только в интернал (Икстернал для интернета.) Однако если он будет и там и там никому от этого плохо не будет )